JVC Emerald EM32T, User Manual

Page: 34 / 44

30
Partial Scan Channels
You can partially scan for network signal within a specified range of channels.
1
Press MENU .
2
Press or to select “Partial Channel Scan”, then press or OK .
3
Press or to select “Scan Mode”, then press or OK .
4
Press or to select an option, then press OK .
t “Analog/Digital”: scan for both analog and digital channels
t “Analog”: scan for analog channels
t “Digital”: scan for digital channels
5
Press or to select “From Channel”, then enter a starting channel range.
6
Press or to select “To Channel”, then enter an ending channel range.
7
Press or to select “Start Scan”, then press
OK
.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK .
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1
Press MENU .
2
Press or to select “Channel”, then press or OK .
3
Press or to select “Find Channel”, then press or OK .
4
Press or to select “Enter Channel”, then enter a channel.
5
Press to select “Add Channel”, then press OK .
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1
Press MENU .
2
Press or to select “Channel”, then press or OK .
3
Press or to select “Channel Management”, then press or OK .
4
Press or , then press OK to mark the channels that you want to remove from the
Channel List.
5
Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.