(No.MB368)1-55
4.3
Service mode
4.3.1 Confirming contents
(1) Tuner AM switch to 9kHz-step
(2) Tuner AM switch to 10kHz-step
(3) Tray lock
(4) Cold start
(5) Clock fast forwarding
(6) Compulsion NTSC mode
(7) Fan ON/OFF setting
(8) Volume large step change
(9) Micon version display
(10) LCD all segment blinking
(11) Tuner version
(12) DVD test mode
(13) DVD initialize
(14) DVD region confirm mode
4.3.2 Confirming methods
1. Tuner AM switch to 9kHz-step
AM frequency change to 9kHz at U-version.
AM frequency is set to 9kHz-step.
Press the [STOP] and [ ] buttons on
the main unit simultaneously at standby.
Press the [STANDBY] button on the
main unit and set the tuner in AM mode.
Press the [STANDBY] button again on
the main unit to enter in standby mode.
" AM 9KHZ "
FL indication
2. Tuner AM switch to 10kHz-step
AM frequency change to 10kHz at U-version.
AM frequency is set to 10kHz-step.
Press the [STOP] and [ ] buttons on
the main unit simultaneously at standby.
Press the [STANDBY] button on the
main unit and set the tuner in AM mode.
" AM 10KHZ "
FL indication
3. Tray lock
Loader-mecha is locked.
EJECT processing isn't done by pushing EJECT key
at tray lock on state.
Then display to LOCKED / UNLOCKED.
EJECT 1 is pushed , pushing STOP again , tray lock is off.
Back up to tray locked ON/OFF.
Press the [STOP] and [DISC 1 EJECT] buttons
on the main unit simultaneously at standby.
" LOCKED "
FL indication
Press the [STOP] and [DISC 1 EJECT] buttons
again on the main unit simultaneously at standby.
" UNLOCKED "
FL indication
Press the [STOP] and [DISC 1 EJECT] buttons
again on the main unit simultaneously at standby.
Press the [STANDBY] button again on
the main unit to enter in standby mode.
Summary of Contents for DX-T5
Page 38: ...1 38 No MB368 Fig 36 Fig 37 Main tray Sub tray Tray stopper Tray stopper ...
Page 113: ...3 51 MEMO ...
Page 168: ... M E M O ...