background image

INSTRUCTIONS

DT-V24L3D
DT-V20L3D

MULTI FORMAT LCD MONITOR

Table of Contents

Safety Precautions .............................................. 2

 

IMPORTANT SAFEGUARDS ........................... 2

Installation ............................................................ 4

Daily Operations / Connections ......................... 6

 

Front panel ....................................................... 6

 

Rear panel ........................................................ 8

 

Available signals ............................................... 9

Menu Configuration—MAIN MENU .................. 10

Menu Configuration—SET-UP MENU ............... 14

External Control ................................................. 16

 

About the external control .............................. 16

 

Using the MAKE/TRIGGER system ............... 17

 

Using the serial communication ..................... 18

Troubleshooting ................................................. 19

 

Self-check program ........................................ 20

Maintenance ....................................................... 20

Specifications .................................................... 21

 

General ........................................................... 21

 

Input/output terminals ..................................... 21

 

Dimensions ..................................................... 22

The illustration of the monitor is of DT-V24L3D.

CAUTION:

  

To reduce the risk of electric shock. Do 
not remove cover (or back). No user 
serviceable parts inside. Refer servicing 
to qualified service personnel. 

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

The lightning flash with arrowhead 
symbol, within an equilateral triangle is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” 
within the product’s enclosure that may 
be of sufficient magnitude to constitute a 
risk of electric shock to persons.  

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.  

CAUTION

LCT2447-001B

DT-V24_20L3D_EN.indd   1

DT-V24_20L3D_EN.indd   1

08.5.27   5:14:42 PM

08.5.27   5:14:42 PM

Summary of Contents for DT-V20L3D

























Reviews: