(No.52097)
DT-V1910CG
10
1.
Attach the Power Cord Holder case to the
AC inlet on the back of the monitor with 2 screws
(provided).
2.
Attach the Power Cord Holder cover to the
AC power cord.
3.
Connect the
AC power cord to the
AC inlet, and join the Power Cord Holder cover with the
case.
A
T
T
ACHING THE POWER CORD HOLDER
•
The provided Power Cord Holder prevents accidental disconnection of the
AC power cord from the
AC inlet.
•
The Power Cord Holder consists of two parts; a case and cover
.
Press the cover until it clicks.
Hold until it clicks.
Caution:
•
A
dif
ferent plug shape will result in the cover being
attached to a dif
ferent position.
•
Check to make sure the plug doesn't pull out after the
cover is attached.
Note:
T
o
disconnect the power cord, click the tab to open the
cover
.
Caution:
Use only the provided screws.
PREP
ARA
TION
(cont'd)
11
BASIC
MENU
OPERA
TIONS
(MAIN MENU, SETUP
MENU)
ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup.
“MAIN MENU”
Items
Functions
Displays
1
APER
TURE CONTROL
Compensates the frequency characteristics of the input video signal.
*
1
2
SLOT
CONDITION
Displays the status of the input cards installed in each of the input card slots.
3
sub menu POSITION
Selects the display position of the sub menu superimposed on the screen.
4
AREA
MARKER
Controls ON/OFF and other settings of the MARKER, SAFETY MARKER,
and ZOOM functions included in the
AREA
MARKER function.
*
2
5
COLOR MA
TRIX
Selects or adjusts the picture color matrix.
*
1
About “Displays”
*
1
: Not displayed when an RGB signal is input.
*
2
: Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input.
When some it
ems are not displayed depending on the input signals, subsequent items will move up.
Position of the menu varies depending on the type of signal.
“SETUP MENU”
Items
Functions
1
FUNCTION SETTING
Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELA
Y
TIME,
tally lamp colors, and MAKE/TRIGGER terminal.
* Checks the amount of time that the monitor has been used.
* Sets the
AUT
O INPUT
function ON/OFF
. (When an input card compliant with
AUT
O INPUT
is
installed.)
* Selects the audio channel group for the EMBEDDED
AUDIO. (When an input card compliant
with EMBEDDED
AUDIO is installed.)
2
PICTURE SUB
ADJ.
Controls the approximate adjustment of the video control level when the video adjustment knob is adjusted to the center
.
* Can also be used to switch the NTSC set-up level, and change the component signal’
s
input level settings.
3
COLOR
TEMP
./BAL.
Sets or adjusts the color temperature or white balance.
4
SIZE/POSI.
ADJ.
Adjusts the size or position of the picture.
5
DIST
OR
TION
ADJ.
Compensates the picture distortion.
6
S
T
A
TUS DISPLA
Y
Sets the status display ON/OFF
.
* Switches the display on and of
f.
Also selects the type of display
. (When an input card compliant with
AUDIO LEVEL
METER
is installed.)
* Switches the
AUDIO PLL
setting. (When SDI input card compliant with EMBEDDED
AUDIO is installed.)
7
CONTROL
LOCK
Sets the control lock preventing the monitor from misuse.
8
all reset
Sets all items in SETUP MENU to factory-preset values.
BUTT
ONS FOR MENU OPERA
TIONS
V
O
LUME
SLO
T
1
A
B
DEGA
U
SS
MENU
MUTING
SCREENS
CHECK
ASPECT
AREA
MARKER
UNDER SCAN
PULSE CR
OSS
COLOR
OFF
SLO
T
2
C
D
SLO
T 3
PO
WER
E
F
INPUT SELECT
V
OLUME
DEGA
USS
MENU
MENU
MUTING
