Specifications
General
Model name
DT-R24L4D
DT-R17L4D
Type
Multi format LCD monitor
Screen size
Type 24 wide format
Type 17 wide format
Aspect ratio
16:10
16:9
Horizontal/vertical frequency
(computer signal)
H: 31.469 kHz – 75.000 kHz
V: 48 Hz – 65 Hz
* Some signals within this frequency range may not be displayed (“Out of range” is displayed).
Compliant video signal format
☞
“Available signals” on page 26
Format
HD SDI: BTA S-004C, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M: 525
EMBEDDED AUDIO:
SMPTE299M, SMPTE272M
Audio output
Internal speaker: 1.0 W + 1.0 W
Operating conditions
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated current
1.15 A (AC 120 V)
0.67 A (AC 220 – 240 V)
1.2 A (AC 120 V)
0.8 A (AC 220 – 240 V)
External dimensions
(excluding protruding parts)
Width:
564 mm (22 1/4˝)
564 mm (22 1/4˝)
Height:
413.1 mm (16 3/8˝) 408 mm (16 1/8˝)
Depth:
181 mm (7 1/4˝)
99 mm (4˝)
(with the stand)
(without the stand)
Width:
430 mm (17˝)
430 mm (17˝)
Height:
314.1 mm (12 3/8˝) 309 mm (12 1/4˝)
Depth:
181 mm (7 1/4˝)
102 mm (4 1/8˝)
(with the stand)
(without the stand)
Weight
10.1 k
g
(22.2 lbs) (with the stand)
8.6 k
g
(18.9 lbs) (without the stand)
8.0 k
g
(17.6 lbs) (with the stand)
6.5 k
g
(14.3 lbs) (without the stand)
Accessories
AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)
LCD panel
Model name
DT-R24L4D
DT-R17L4D
Type
24˝ wide, active matrix TFT
17˝ wide, active matrix TFT
Effective screen size
Width:
518.4 mm (20 1/2˝)
Height: 324 mm (12 7/8˝)
Width:
372.9 mm (14 3/4˝)
Height: 209.7 mm (8 3/8˝)
Number of pixels displayed
1 920 x 1 200
1 366 x 768
Number of colors displayed
16.77 million
Viewing angle (TYP.)
178° (Horizontally), 178° (Vertically)
178° (Horizontally), 178° (Vertically)
Brightness (TYP.)
400 cd/m
2
350 cd/m
2
Contrast ratio (TYP.)
1000:1
900:1
Input/output terminals
Model name
DT-R24L4D
DT-R17L4D
Video
VIDEO (INPUT 1)
Input/output of composite signal:
2 line, BNC connector x 4,
1 V(p-p), 75
Ω
VIDEO
Input/output of composite signal:
1 line, BNC connector x 2,
1 V(p-p), 75
Ω
VIDEO (INPUT 2)
* The input (IN) and output (OUT)
terminals are bridge-connected (auto
termination).
* The input (IN) and output (OUT)
terminals are bridge-connected (auto
termination).
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
E. AUDIO HD/SD SDI (IN 1)
Digital signal input (compatible with EMBEDDED AUDIO signals):
auto detection, 2 line, BNC connector x 2
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
Audio
AUDIO ASSIGN (IN 1)
Analog audio signal input:
2 line, RCA connector x 4,
500 mV (rms), high impedance
AUDIO (IN)
Analog audio signal input:
1 line, RCA connector x 2,
500 mV (rms), high impedance
AUDIO ASSIGN (IN 2)
AUDIO ASSIGN
(MONITOR OUT)
Analog audio signal output:
1 line, RCA connector x 2,
500 mV (rms)
AUDIO
(MONITOR OUT)
Analog audio signal output:
1 line, RCA connector x 2,
500 mV (rms)
External
control
REMOTE (MAKE/TRIGGER)
☞
“Using the MAKE/TRIGGER system” on page 18
REMOTE (RS-485)
☞
“Using the serial communication” on page 20
REMOTE (RS-232C)
Summary of Contents for DT-R17L4D
Page 29: ......
Page 30: ... 2010 Victor Company of Japan Limited 0610SKH CR MT ...
