JVC DR-MV1 Page 51 Instructions Manual Download

Page: 51 / 104

Masterpage:Right+

Filename [DR-MV1SE_07VCR Operation.fm]

Page 51

March 11, 2004 7:27 pm

OPERATIONS ON VCR DECK

Next Function Memory

The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.

For Automatic Start Of Playback

Press

, then press

within 2 seconds.

For Automatic Power Off

Press

, then press

within 2 seconds.

For Automatic Cassette Ejection After Tape Rewind

Press

, then press

on the unit within 2 seconds.

Repeat Playback

Your unit can automatically play back the whole tape 100 times
repeatedly.

Press

to start playback.

Press and hold

for over 5 seconds, then release.

●

lights up on the front display panel.

●

After playing back a tape 100 times, the unit stops automatically.

Press

at any time to stop Repeat Playback.

●

Pressing

also stops Repeat Playback.

Manual Tracking

Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the

buttons.

During playback, press

PR +

–

on the unit simultaneously to

activate manual tracking.

Press

PR +

–

to adjust the tracking manually.

●

Press

REC MODE

again to return to automatic tracking.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking
mode automatically.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI
R and NORM) and will play back the one you select.

During Playback

Pressing

AUDIO

changes the soundtrack as follows:

NOTES:

●

“HIFI L

j h

R” should normally be selected. In this mode, Hi-Fi

stereo tapes are played back in stereo, and the normal audio track is
played back automatically for tapes with only normal audio.

●

For instructions on recording stereo and bilingual programmes, refer
to page 53.

●

“O.S.D.” must be set to “AUTO” or the on-screen displays will not
appear. (

墌

pg. 80)

VHS Progressive Scan

You can watch the image on VCR deck in the Progressive scan
mode via component video.

ATTENTION:

Your TV needs to be compatible with Progressive and to have
Component video input connectors.

Set the Progressive-compatible TV to the component input

mode.

Press

VCR/DVD

repeatedly so that the DVD lamp lights up on

the unit, then press

PROGRESSIVE SCAN

for 3 or more seconds

so that the Video output indicator (

) lights on the front display

panel.

Press

VCR/DVD

repeatedly so that the VCR lamp lights up on

the unit.

Press

VCR

]

●

“VCR

]

” lights up on the unit.

NOTES:

●

Be sure to engage the DVD deck in stop mode.

●

It is not possible to perform the above steps when the DVD deck is in
timer standby mode.

TRACK

USE

On-Screen Display

HI FI

For Hi-Fi stereo tapes

HI FI

For main audio of Bilingual tapes

HI FI

For sub audio of Bilingual tapes

NORM

For audio-dubbed tapes

HI FI

NORM

For audio-dubbed tapes

DR-MV1SE_00.book Page 51 Thursday, March 11, 2004 7:28 PM

Summary of Contents for DR-MV1








































































































Search results

Summary of Contents for DR-MV1

Reviews:

Related manuals for DR-MV1

Brands by name

Popular brands

JVC DR-MV1, Instructions Manual

Search results

Summary of Contents for DR-MV1

Reviews:

Related manuals for DR-MV1

Brands by name

Popular brands