Filename [DR-MV1SE_04Name.fm]
Masterpage:Left+
18
EN
Page 18
March 11, 2004 7:27 pm
INITIAL SETTINGS
Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Program Number Set
If you have connected the unit to your TV via a 21-pin SCART
cable (
墌
pg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step
4
on page 17. After
downloading, the unit sets the clock and Guide Program numbers
automatically.
1
Press
rt
to select “T-V LINK”
and press
ENTER
. The T-V LINK
screen will appear.
ATTENTION:
Preset positions on the front display
panel increase from “PR 1”; do NOT
press any button on the unit or
remote control until the front display
panel shows clock time, “PR 1” or
“– –:– –” as illustrated on page 19.
●
When Preset Download is
completed, “COMPLETED”
appears for about 5 seconds, then
the normal screen appears.
●
If you press any button on the unit
or remote control while
downloading is in progress, it will
be interrupted.
NOTES:
●
For details, refer to the instruction manual of your TV.
●
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock Set
nor Auto Guide Program Number Set.
●
If there is a power cut, or if you press
1
or
SET UP
while
downloading or set up is in progress, it will be interrupted; be sure to
turn off the unit power once and try again from the beginning.
●
Auto Clock Set may not function properly depending on the reception
condition.
●
On this unit, the characters available for station names (ID) are A–Z,
0–9, –,
f
, + and
I
(space). Some names of downloaded stations
may differ from those of your TV. (
墌
pg. 84)
Preset Download
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
1
4
7
2
5
8
0
3
6
9
DISPLAY
8
DISPLAY
8
VCR/DVD
SAT
●
Slide the
TV/CABLE/SAT/DVD
switch to
DVD
.
●
Perform steps
1
to
3
of “Auto Set Up” (
墌
pg. 17) before continuing.
After “Preset Download” is completed, perform “Monitor Set
(DVD Deck Only)” on page 23.
DR-MV1SE_00.book Page 18 Thursday, March 11, 2004 7:28 PM