background image

1-2 (No.YD089)

SPECIFICATION

E.& O.E. Design and specifications subject to change without notice.

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection

technology must be authorized by Macrovision. Reverse engineering or disassembly is prohibited.

• GUIDE Plus+, SHOWVIEW,VIDEO Plus+, G-LINK are (1) registered trademarks or trademarks of, (2) manufactured under license from and (3) subject of various

international patents and patent applications owned by, or licensed to, Gemstar-TV Guide International, Inc. and/or its related affiliates.

• GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE ACCURACY OF THE PRO-

GRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND
/OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL,
OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION, EQUIPMENT, OR SERVICES RELATING
TO THE GUIDE PLUS+ SYSTEM.

• i-LINK is a trademark of Sony Corp .
• HDMI is a trademark of HDMI Licensing, LLC .

DR-MH300SER

DR-MH300BE,DR-MH300SE,DR-ED400SE

DR-MH300SEF

DR-MH300BEK,DR-MH300SEK

GENERAL

Power requirement AC 220 V - 240 V~, 50 Hz/60 Hz

Power consumption Power on : 36 W

Power off : 6.4 W

Temperature Operating : 5

°

C to 35

°

C

Storage : -20

°

C to 60

°

C

Operating position Horizontal only

Dimensions (W 

×

 H 

×

 D) 435 mm 

×

 70 mm 

×

  300 mm

Weight 4.6 kg

VIDEO/AUDIO (DVD Deck)

Recordable disc

DVD-RAM 12 cm (4.7 GB/9.4 GB*1),DVD-RAM 8 cm (1.4 GB/2.8 GB*2),DVD-R 12 cm (4.7 GB),DVD-R 8 cm (1.4 GB),DVD-RW 12
cm (4.7 GB),DVD-RW 8 cm (1.4 GB)
*1 9.4 GB double-sided discs
*2 2.8 GB double-sided discs

Recording format

DVD-RAM : DVD Video Recording format
DVD-R : DVD Video format, DVD Video Recording format
DVD-RW : DVD Video format, DVD Video Recording format

Recording time Maximum 8 hours (with 4.7 GB disc)

(XP) : Approx. 1 hour, (SP) : Approx. 2 hours, (LP) : Approx. 4 hours, (EP) : Approx. 6 hours, (FR) : Approx. 1 hour - 8 hours

Audio recording system Dolby Digital (2 ch)

Linear PCM (XP mode only)

Video recording compression system MPEG2 (CBR/VBR)

VIDEO/AUDIO (HDD Deck)

Capacity 160 GB

Recording time (DV) : Approx. 11 hours,(XP) : Approx. 34 hours,(SP) : Approx. 69 hours,(LP) : Approx. 138 hours,

(EP) : Approx. 209 hours,(FR480) : Approx. 300 hours

Audio recording system Dolby Digital (2 ch)

Linear PCM (XP mode only)

Video recording compression system MPEG2 (VBR)

Input/Output

21-pin SCART connectors IN/OUT X 1, IN/DECODER X 1

S-video input Y:1.0 Vp-p,75 ohms

C : 0.3Vp-p, 75 ohms

Video input 1.0 Vp-p, 75 ohms (pin jack)
Audio input 2 Vrms (pin jack)

i.Link 4-pin for DV Input/Output

Component video output Y : 1.0 Vp-p, 75 ohms

PB/PR: 0.7 Vp-p, 75 ohms

Corresponding to copy protection

HDMI output 19-pin, Corresponding to HDCP

Video : 576i/576p/1080i/720p
Audio : 2 ch PCM/Bitstream

Digital audio output Coaxial

Corresponding to Dolby Digital and DTS Digital Surround, 
Bit stream
Selectable in digital audio output setting menu

G-LINK

-

3.5 mm Jack

TUNER/TIMER

Tuning system Frequency synthesised tuner

Signal system PAL/SECAM colour signal, 625 lines/50 fields

PAL colour signal,625 lines/50 fields

TV channel storage capacity 99 positions (+AUX position)

Channel coverage

(SECAM-L)

-

VHF(LOW):49 MHz-65 MHz(2-4)
VHF(HIGH):104 MHz-300 MHz(5-
10CATV)
Hyper:300 MHz-470 MHz(CATV)
UHF:470 MHz-862 MHz(21-69)

-

Channel coverage(PAL) VHF : 47 MHz - 89 MHz/

           104 MHz - 300 MHz/
           302 MHz - 470 MHz
UHF : 470MHz - 862MHz

VHF(LOW):47 MHz-89 MHz
(E2-E4,X,Y,Z)
VHF(HIGH):104 MHz-300 MHz
(E5-E12,S1-S20,M1-M10,U1-U10)
Hyper:302 MHz-470 MHz(S21-S41)
UHF:470 MHz-862 MHz(E21-E69)

VHF : 44.5MHz - 143MHz/
         143MHz - 470MHz/
UHF : 470MHz - 862MHz

Memory backup time Approx. 10 minutes.

Summary of Contents for DR-MH300BE



















Reviews: