(No.XA013)1-7
3.1.3 Remove the mechanism assembly (See figure 4)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the front panel assembly.
(1) Disconnect the socket wire from connector
CN5303
on the
power supply board.
(2) Disconnect the card wire from connector
CN2201
on the
module board.
(3) Remove the four screws
C
attaching the mechanism as-
sembly.
Fig.4
3.1.4 Remove the module board (See figure 5, figure 6)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the card wire from connector
CN2201
on the
module board.
(2) Remove the four screws
D
attaching the module board.
(3) Lift the module board up, and remove it. Then, the module
board is removed from the connector
CN4104
on the DV
terminal board and the connector
CN4101
on the main
board. In attaching the module board, insert the connector
on the module board in these connectors securely.
Fig.5
Fig.6
Module board
Mechanism assembly
CN2201
CN5303
C
C
C
C
Power supply
board
D
Module board D
D
CN2201
Module board
DV Terminal board
Main board
CN4101
CN4104
Summary of Contents for DR-M1SL
Page 37: ...2 24 No XA013SCH MEMO MEMO ...
Page 38: ... No XA013SCH 2 3 MEMO 2 25 ...