Masterpage:Right0
EN
53
Filename [M150SEK_09Editing.fm]
EDITING
You can dub programmes from a camcorder or DV equipment
connected to the unit with a DV cable. The unit’s remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
The following on-screen display for DV dubbing appears when
ON SCREEN
is pressed while the channel has been set to
A
DV
B
.
A
DV dubbing controller
If this mark is not displayed, check whether the DV equipment
has been connected to the unit.
B
Auto capture button
Select to start or pause the dubbing. If
ENTER
is pressed when
the DV device is in the pause condition, preroll editing* where it
is possible to dub with a start time that is highly accurate will be
activated. When the DV device cannot be operated from the unit
(such as in camera mode), proceed with normal recording
(
A
pg. 34).
* Preroll editing refers to the playback after the DV tape is slightly rewind.
(For DV devices that do not support the
–
1x speed, the rewinding time
may be longer.)
C
Sound monitor switch
For selecting the desired sound format for dubbing.
1
Connect a camcorder or DV equipment to the [DV IN] connector
on the unit’s front panel.
2
Press
PR +/–
to set the channel to
A
DV
B
.
●
The on-screen display for DV dubbing appears.
3
Press
REC MODE
repeatedly to set the recording mode.
4
Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control:
I
,
N
,
O
,
o
,
W
.
●
To play back in slow speed (1/10 of the normal speed), press
W
to pause playback, then press
O
or
N
.
●
To play back frame-by-frame, press
W
to pause playback, then
press
W
repeatedly. Each press of
W
advances a frame.
●
To change the playback direction, press
O
or
N
.
5
Press
selection keys
to select
, then press
ENTER
. Select the desired sound track from the pull-down
menu, then press
ENTER
.
AUDIO 1
:
Select this to record the original stereo sound played back on
the connected DV equipment.
AUDIO 2
:
Select this to record the dubbed stereo sound played back on
the connected DV equipment.
MIX
:
Select this to record the sound of both
A
AUDIO 1
B
and
A
AUDIO 2
B
.
●
Note that this selection is not available when the source
programme is recorded in 16BIT (48 kHz) mode.
6
Press
selection keys
to select
, then press
ENTER
.
The dubbing starts.
●
Playback on the external DV equipment and recording on the
unit should start simultaneously.
●
To pause dubbing, press
selection keys
to select
,
then press
ENTER
. Both the unit and the external DV
equipment pause dubbing.
●
To resume dubbing, press
selection keys
to select
,
then press
ENTER
to start dubbing.
7
Press
o
to stop dubbing.
●
Both the unit and the external DV equipment stop dubbing.
NOTES:
●
Dubbing copyright guarded programmes is not possible.
●
Original DV information such as the recording date and time are
not recorded.
●
The superimposed indication during the operation or dubbing is
not recorded.
●
If the dubbing is paused while the channel is set to
A
DV
B
, you
cannot switch channels.
●
Only DV format video can be dubbed. It is not possible to dub
MPEG2 format video.
DV Dubbing
NOTES:
●
Use the DV cable VC-VDV 204U for connection.
●
When you connect a PC to the [DV IN] connector, we do not
assure the normal operation of this unit.
RAM/RW
To [DV IN]
DV cable
(VC-VDV 204U)
(not supplied)
Camcorder
DV connector
Your unit
DV equipment
DV
1 2
A
B
C
DV
AUDIO 1
DV DUBBING
M150SEK_00.book Page 53 Wednesday, June 15, 2005 4:04 PM
