Filename [M100SEK_07Timer Recording.fm]
Masterpage:Left+
42
EN
TIMER RECORDING
1
Disengage the timer mode.
●
When
lights up on the front display panel, press
DVD
A
.
●
When
j
lights up on the front display panel, press
TIMER
j
,
and press
DVD
A
after
j
lights off.
●
When
A
SAT
j
B
lights up on the front display panel, press
SAT
j
.
2
Press
PROG
to access the Programme Check screen.
●
To return to the previous screen after you check the
programme, press
PROG
again.
To cancel the programme
●
Press
selection keys
to select a programme to be cancelled,
then press
CANCEL
.
3
Press
selection keys
to select a programme to be changed,
then press
ENTER
.
4
Change the settings of the desired recording options as
required.
●
Refer to steps
4
-
10
in Manual Timer Programming.
5
Press
PROG
to exit the programme screen.
6
Set the unit to timer standby mode.
For VIDEO Plus+ or Manual Timer Programming
●
Press
TIMER
j
so that
j
lights up on the front display panel.
For On-Disc Timer Programming
●
Press
DVD
A
so that
lights up on the front display
panel.
For Automatic Satellite Programme Recording
●
Press
SAT
j
for 2 or more seconds.
When Programmes Overlap Each Other
If
A
PROGRAMME OVERLAPPED
B
appears, you have another
programme overlapping the programme you have just made.
Press
PROG
. Programme Check screen appears and conflicting
programmes will be highlighted in pink.
Example: Programme 3
(you have just made) and
Programme 4 overlap
each other.
1
Confirm the overlapping
programmes.
NOTES:
●
If you do not mind this overlap, press
PROG
to finish the timer
programme setting.
●
Recording is performed according to the order as displayed on
the Programme Check screen. The timer programme that follows
will not be performed correctly.
To cancel the programme
Press
selection keys
to select a programme to be cancelled, then
press
CLEAR
(
o
).
●
A
THE TIMER PROGRAMMING SETTING WAS CANCELLED
B
appears on the TV screen for about 5 seconds, then the normal
screen resumes.
To change the programme
Press
selection keys
to select a programme to be changed, then
press
ENTER
.
●
Change each setting as required.
2
Press
ENTER
to exit the Programme screen.
3
Press
TIMER
j
to enter into timer standby mode.
NOTE:
When any overlaps remain after deletion and modification of
programmes, Programme Overlap list remains showing the
conflicting programmes. In such a case, repeat the procedure
above until the conflict is solved.
Check, Cancel And Change Programmes
(
FGDE
)
ENTER
PROG
CANCEL
DVD
A
CLEAR (
o
)
TIMER
j
SAT
j
Selection Keys
PROGRAMME CHECK
DATE
++++++++++++++++++ NEW TIMER PRO+++++++++++++++++
START-STOP
TV PROG
VPS/PDC REC MODE
DISC TIMER PRGM
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
PROG
EXIT
05/07 SAT
18:10-20:00
L-1
SP
10/07 THU
19:00-20:00
7
XP
10/07 THU
19:45-20:30
7
LP
WEEKLY
ON
OFF
OFF
DAILY/WEEKLY
06/01 THU
18:10-20:00
L-1
SP
ON
M100SEK_00.book Page 42 Tuesday, March 22, 2005 5:31 PM
