1-8 (No.YD089B)
3.2
DVD Drive unit section
3.2.1 Remove the top cover and tray (See figure 1, figure2, figure3, figure4)
(1) The part
a
on the reverse side of a DVD drive unit is made
to slide in the direction of an arrow. (A tray ejects a few.)
(2) Remove the four screws
A
attaching the top cover.
(3) Hooks
b
are removed, and the top cover is removed.
(4) The tray is drawn out forward.
(5) Remove the two screws
B
attaching the shaft guide, and
hook
c
is removed.
(6) It draws it out while lifting the tray in the direction of the ar-
row.
Fig.1
Fig.2
Fig.3
Fig.4
Part a
A
A
A
A
Hook b
Hook b
Top cover
B
B
Hook c
Shaft guide
Tray