JVC DR-DX5SEK, Instructions Manual

Page: 31 / 92

Masterpage:Right+
EN
31
Filename [DX5SEK_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Page 31Thursday, 10 November 2005 16:34
Time Search
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a programme
(DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc
(Video CD/SVCD and Audio CD).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A
j9
B , then press ENTER . The
DVD-
VIDEO
CHAPTER 99 EACH 0:00 TITLE 99
CINEMA AUTO
pop-up window appears under the selected item.
3
Press the number keys to enter the time, then press ENTER .
Playback starts from the specified time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
If you have specified a wrong selection,
Press RETURN on the remote control and repeat the above
procedures from step 2 .
To clear the on-screen bar
Press ON SCREEN.
NOTES:
●
When
A
7
B
is displayed on the TV screen in step 3 , you have
selected a point that exceeds the recording time of the disc.
●
Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases,
A
7
B
is displayed on the TV screen as well.
●
This function is not possible for a Video CD/SVCD with PBC
function.
Simulated Surround Effect
It is possible to get a simulated surround effect from your stereo
system. You can enjoy the virtual surround sound with your 2-
channel stereo system.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A B , then press ENTER .
●
A
3D-ON
B
appears above the selected item and Simulated
Surround Effect is activated.
●
Each time you press ENTER ,
A
3D-ON
B
appears and disappears
DVD-
VIDEO
CHAPTER 99 EACH 0:00 TITLE 99
3D-ON CINEMA AUTO
alternately.
To clear the on-screen bar
Press ON SCREEN .
To cancel the simulated surround effect
Press ENTER to clear A 3D-ON B from the screen.
NOTES:
●
Simulated Surround Effect works correctly only when playing
back a title recorded in multichannels.
●
Simulated Surround Effect does not affect the DVD VIDEO
bitstream signal from the [DIGITAL AUDIO OUT] connectors.
●
When Simulated Surround Effect is activated, the settings of
A ANALOG AUDIO OUT B and A D. RANGE CONTROL B are
disabled. (
A
pg. 71)
●
Simulated Surround Effect cannot be activated under the
following conditions:
●
When the HDD deck is in the recording mode.
●
When the HDD or DVD deck is in the timer standby mode.
●
When a disc containing both the Dolby Digital 5.1CH and 2CH
sound formats is playing back a scene that is not in the 5.1CH
sound format.
Adjusting The Picture Quality
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select A B , then press ENTER . The
DVD-
VIDEO
CHAPTER 99 EACH 0:00 TITLE 99
CINEMA AUTO
pop-up window appears under the selected item.
3
Press selection keys to select the desired option, then press
ENTER .
NORMAL
:
Normally select this option.
CINEMA
:
Suitable for a movie disc, etc.
SHARP
:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-coloured surfaces such as cartoons.
SOFT
:
Select this option when too much noise appears.
To clear the on-screen bar
Press ON SCREEN.
T
ENTER
I
S
0-9
ON SCREEN
RETURN
CLEAR
CANCEL
FGDE
CABLE/SAT
DVD TV
Selection Keys
TIME
TIME
TIME
TIME
TIME
Press 1
Press 2
Press 0 Press 5
DX5SEK_00.book Page 31 Thursday, November 10, 2005 4:35 PM