JVC DR-DX5SE, Instructions Manual

Page: 18 / 92

Filename [DX5SEU_05Name.fm]
Masterpage:Left+
18
EN
INITIAL SETTINGS
Page 18 Wednesday, 23 November 2005 14:13
Auto Channel Set by Downloading from TV/Auto Clock
Set/Auto Guide Programme Number Set
If you have connected the unit to your TV via a 21-pin SCART
cable (
A
pg. 16), the unit will automatically perform Preset
Download instead of the Auto Set Up in step 4 on page 17. After
downloading, the unit sets the clock and Guide Programme
numbers automatically.
1
Press selection keys to select A T-V LINK B and press ENTER .
The T-V LINK screen will appear.
●
When T-V LINK is completed,
A SCAN COMPLETED B
appears on the TV screen.
Select
A OK B .
ATTENTION:
Preset positions on the front
display panel increase from
A PR 1 B ; do NOT press any button on
the unit or remote control until the front display panel shows clock
time,
A PR 1 B or A – –:– – B as illustrated on page 19.
●
If you press any button on the unit or remote control while
downloading is in progress, it will be interrupted.
NOTES:
●
For details, refer to the instruction manual of your TV.
●
In areas where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock
Set nor Auto Guide Programme Number Set.
●
Auto Clock Set may not function properly depending on the
reception condition.
●
On this unit, the characters available for station names (ID) are
A–Z, 0–9, –,
Z
, + and
&
(space). Some names of downloaded
stations may differ from those of your TV. (
A
pg. 76)
Preset Download
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.*
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
DE
ENTER
CABLE/SAT
DVD TV
Selection Keys
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
●
Perform steps 1 to 3 of A Auto Set Up B (
A
pg. 17) before
continuing.
After A Preset Download B is completed, perform A Monitor Set B
on page 21.
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > AUTO CH SET
AUTO SET T-V LINK
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
ENTER
SELECT
SET UP
EXIT
INITIAL SET UP > T-V LINK
T-V LINK
PLEASE WAIT...
CANCEL
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DX5SEU_00.book Page 18 Wednesday, November 23, 2005 2:13 PM