ECO Mode
Setting
Description
On
Enables “ECO Mode” to minimize power consumption in the Standby mode.
0
RS-232C / LAN communication cannot be used in the Standby mode.
0
If there is no signal transmission and operation for 20 minutes while an image
is projected, the power management switches the equipment automatically into
standby mode.
Off
Select this option to control via RS-232C / LAN communication in the Standby
mode or if Control4 is to be used.
Network
Specify the settings below during external control such as from a PC or smartphone.
Setting
Description
DHCP Client
On
Obtains the IP address automatically from the DHCP server inside the connected
network.
Off
For configuring the network settings manually.
IP Address
For configuring the IP address.
Subnet Mask
For configuring the subnet mask.
Default Gateway
For configuring the default gateway.
MAC Address
Displays the MAC address of the unit.
Set
Applies the network settings.
Control4
Set to “On” to allow Control4 SDDP to detect this unit.
When this unit is not connected to an environment under the control of the controller
and Control4 SDDP from the Control4 Corporation, set this to “Off”.
Glossary of Network Terminology
DHCP
: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
IP Address
: Numeric characters for identifying the device that is connected to the network.
Subnet Mask
: Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
Default Gateway
: Server for communicating beyond the network that is divided by the subnet mask.
MAC Address
: Abbreviation for Media Access Control address. This is a number that is unique to each
network adapter. Each of the network adapters is assigned with a unique MAC address.
55
Adjust/Set
