JVC dla-rs400, Instruction Manual

Page: 34 / 80

Adjusting Movies for Increased
Expressiveness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC
helps to create a natural impression that is sharper at
areas in focus, and softer at areas that are not in focus,
enabling you to enjoy highly expressive 4K images with
a greater sense of depth.
1
Press the [MPC] button to display the
adjustment menu
0
You can also perform setting from “Picture
Adjust”
"
“MPC Level” in the menu.
.
>>
MENU
BACK
0
0
0
0
PICTURE MODE
FILM CINEMA ANIME.
NATURAL THX USER
ADVANCED
MENU
3D
FORMAT
PIC.
ADJ.
COLOR
TEMP.
GAMMA
P.ANALYZER MPC
Back Operate
Select
Exit
Auto
On
Before Reset
NR
Smoothing
Dynamic Contrast
Enhance
Original Resolution
4K e-shift
MPC Level
Picture Adjust
2
Make adjustments according to your
preference based on the setting of the
selected “Picture Mode”
* The factory setting varies with the “Picture
Mode”.
Item Setting Description
4K e-shift On (4K)/Off
(2K)
Switches the display
resolution.
Original
Resolution
Auto/4K/
1080p
For selecting a resolution for
the content you are viewing.
Enhance* 0 to 10 Enhances the sharpness of
the image.
Dynamic
Contrast
0 to 10 Enhances the contrast of the
image.
Smoothing 0 to 10 Enhances the blurriness of
the image for a softer effect.
NR 0 to 10 For reducing the noise of the
video image.
* In the case of 4K 50/60p and other input signals, the
respective setting values are saved.
0
In the default “Original Resolution” setting (“Auto”), the
resolution is set automatically.
0
By increasing the setting range, you can expect
enhanced effects.
0
Images are displayed in the original resolution (2K)
when “4K e-shift” is set to “Off”.
0
“Original Resolution”, “Enhance”, “Dynamic Contrast”,
and “NR” can be adjusted even when “4K e-shift” is set
to “Off”.
0
“4K e-shift” is fixed at “On” during 4K signal input.
0
“Original Resolution” is fixed at “Auto” during 4K
50/60p signal input. “Dynamic Contrast”, “Smoothing”
and “NR” are grayed out.
0
“4K e-shift” is fixed at “Off” during 3D signal input.
3 Press the [MENU] button to exit
Toggling between the States before
and during Adjustment
Pressing the [HIDE] button on the remote control enables
you to toggle between the states before adjustment and
during adjustment.
34
Adjust/Set