HDR Processing
This is a feature for configuring the content analysis method using “Tone Mapping” when “Picture Mode” is configured
to “Frame Adapt HDR”.
*1 This is not available and does not appear in the menu when “Content Type” is configured to “SDR”.
*2 When “Picture Mode” is configured to “HDR10”“Pana_PQ”“HLG”“User 4 to User 6”, “HDR Processing” is fixed
at “Static”.
Setting
Description
Frame by Frame
Automatically adjusts the HDR tone mapping after analyzing the peak brightness
of each frame.
Scene by Scene
Automatically adjusts the HDR tone mapping after analyzing the peak brightness
of each scene.
Static
Configures based on the mastering information (MaxCLL/FALL) of the content and
does not make any dynamic adjustment.
Gamma/Tone Mapping
This item adjusts “Gamma/Tone Mapping” according to the preconfigured “Picture Mode” (output value of the projected
video with respect to the video signal input). It is also used to adjust the preconfigured “Gamma/Tone Mapping” setting.
“Adjusting the Output Value of the Projected Image (Gamma/Tone Mapping)” (P. 38)
0
The available “Gamma/Tone Mapping” settings vary according to the “Picture Mode”.
* When “Picture Mode” is configured to “Frame Adapt HDR”, “Gamma/Tone Mapping” is fixed at “HDR(Auto)” and the
detailed settings cannot be configured.
Correction Value
For setting the base gamma for the adjustment of “Picture Tone”, “Dark Level” and “Bright Level” when one of the
“Custom 1” to “Custom 3” settings is selected in Gamma/Tone Mapping.
“Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P. 41)
Picture Tone
Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.
“Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P. 41)
“Performing Tone Mapping Manually” (P. 45)
Dark Level / Bright Level
You can adjust the image quality to produce a sharp contrast in the brightness.
“Fine-tuning of Gamma/Tone Mapping to Preferred Settings” (P. 41)
“Performing Tone Mapping Manually” (P. 45)
55
Adjust/Set