42
Menu Operations
DLA-G150CLU / LCT1123-001B / ENGLISH
■
Quick Reference Guide for PC Menu Mode
* : Factory set value.
Main Menu in PC Menu Mode (While receiving computer-related signals)
Image adj.
→
(Refer to page 49)
Contrast:
Contrast of the picture image being projected can be adjusted. (–30 to +30, 0*)
Brightness:
Brightness of the picture image being projected can be adjusted. (–30 to +30, 0*)
Sharpness:
Adjust the outline of letters etc. (1 / 2 / 3 / 4 / 5, 3*)
All reset:
Resets above items to the factory set values.
Yes / No
Set up
Tracking:
The lateral size and display area of picture image can be adjusted. (–128 to +127)
→
(Refer to page 47)
Phase:
Flickering or dim picture image can be adjusted. (0 to 31)
→
(Refer to page 47)
Position:
Video screen position and menu position can be adjusted.
→
(Refer to page 51)
Disp. Posi. / Menu
Resize:
The relationship between the number of pixels (resolution) and the screen can be
selected.
→
(Refer to page 53)
“1:1”:
Picture image is projected with its original size.
Panel:
Picture image is enlarged to the full size.
Aspect*:
Picture image is enlarged while maintaining the original aspect ratio.
Clamp:
Selectable clamp position. Normally, set to “BP”. ST / BP*
Color temp.
Color temp.:
Adjustable color temperature, Low/Middle* /High.
Will be adjusted to correct reddish or blueish image.
RED:
Adjusts the red level. (o to 255, the adjustable range varies depending on signals)
GREEN:
Adjusts the green level. (o to 255, the adjustable range varies depending on signals)
BLUE:
Adjusts the blue level. (o to 255, the adjustable range varies depending on signals)
All-reset:
Reset above items to the factory set values.
Yes/No
Options
→
(Refer to page 54)
Options 1
Menu display:
15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
Line display:
5sec* (Line display such as “PC1” or “PC2” appears on top right of the screen for 5
seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not
appear.)
Lamp time display:
ON*:
Displays when the lamp use time reaches 1000 hours when set in the LPC or LOC mode.
OFF:
Does not display when the lamp use time reaches 1000 hours when set in the LPC or LOC
mode.
Keystone:
Press ENTER to enter the Keystone submenu.
Keystone:
Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +128, 0*)
Lamp control:
Normal*:
Used as a normal lamp.
LPC:
Lamp brightness is aLutomatically controlled with time.
LOC:
Lamp brightness is controlled in 7 levels (-6 to 0) irrespective of the time. This is set within
the menu.
Page 2:
Press ENTER to enter the “Page 2” submenu.
Flip H:
OFF* / ON (Select for upside-down hanging on the ceiling.)
Flip V:
OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]:
Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min]:
Selectable sleep times. If no-signal condition continues for the
period of selected time (Unite: Minutes), the projector enters the
stand-by mode. 15 / 30 / 60 / OFF*
Page 1:
Press ENTER to return to the “Page 1” submenu.
Language
Language for on-screen display.
→
(Refer to page 46)
Japanese / English* / German / Spanish / Italian / French
Information
→
(Refer to page 56)
Input:
Shows the terminal name selected by the PC button. (PC1 or PC2)
Switcher:
This display currently has no meaning. (“CH.0” is usually displayed to indicate that it is not being used.)
Resolution:
Shows the resolution of the input signal being received. (Horizontal
×
Vertical)
It may not be displayed correctly with some input signals.
Frequency H:
Shows the horizontal frequency of the input signal being received. ( kHz)
Frequency V:
Shows the vertical frequency of the input signal being received. ( Hz)
Lamp time:
Accumulated used hours of the light-source lamp.
DLA-G150CLU&CLE_Eng.book Page 42 Thursday, February 21, 2002 2:39 PM
