JVC DLA-20LTD Instructions Manual Download Page 31

Page: 31 / 84

Setting the Color Profile

By setting the “Color Profile” (color space information) according to the “Picture Mode”, you can fine-tune the image

quality according to the movie you are viewing.

Configure “Picture Mode” (P. 30), then select “Picture Adjust”

“Color Profile” in the

The selectable “Color Profile” settings vary according to the “Picture Mode” and also whether the signal is 2D

or 3D.

List of “Color Profile” for “Picture Mode”

Picture Mode

2D Signal Input

3D Signal Input

Description

Film

Film 1

—

Color space that is close to the characteristics of Eastman Kodak Company movie films.

Film 2

—

Color space that is close to the characteristics of FUJIFILM Corporation movie films.

Film 3

—

Color space suitable for digitally remastered piece of art based on a Technicolor film.

—

3D Film*1

Color space suitable for 3D movies recorded in film.

Cinema

Standard

Color space of the HDTV standard. *2

Cinema 1

—

Original JVC cinema-specific color gamut that achieves a balance between increased

brightness and color vividness.

Cinema 2

—

Color space that is close to that of the DCI standard.

—

3D Cinema

Color space suitable for all 3D movies.

HDR

—

Color space suitable for HDR content.

BT.2020

—

Color space that is suitable for BT.2020.

Animation

Standard

Color space of the HDTV standard. *2

Anime 1

—

Color space that is suitable for CG animation works. Ideal for animated works with bright

colors.

Anime 2

—

Color space that is suitable for cel animation works. Ideal for animated works with light

colors.

—

3D Animation

Color space suitable for 3D animation works.

HDR

—

Color space suitable for HDR content.

BT.2020

—

Color space that is suitable for BT.2020.

Natural

Standard

Color space of the HDTV standard. *2

Video

—

Color space that is suitable for drama footage, etc. making use of the increased brightness.

—

3D Video

Color space suitable for 3D video materials.

Reference

—

Color space that faithfully reproduces the video as it is.

HDR

—

Color space suitable for HDR content.

BT.2020

—

Color space that is suitable for BT.2020.

HDR

Standard

Color space of the HDTV standard. *2

Video

Color space that is suitable for drama footage, etc. making use of the increased brightness.

HDR

Color space suitable for HDR content.

BT.2020

Color space that is suitable for BT.2020.

THX

THX*3

—

Color space of the THX standard.

—

3D THX*3

Adjust/Set

Summary of Contents for DLA-20LTD





















































































Search results

Summary of Contents for DLA-20LTD

Reviews:

Related manuals for DLA-20LTD

Brands by name

Popular brands

JVC DLA-20LTD, Instructions Manual

Search results

Summary of Contents for DLA-20LTD

Reviews:

Related manuals for DLA-20LTD

Brands by name

Popular brands