Main Unit - Input Terminals
.
A
B
C
D
E
F
Enlarged View of Rear Face
A
[HDMI 1] input terminal
B
[HDMI 2] input terminal
For connecting to devices that support HDMI output.
(P. 18)
It is fitted to the M3 lock hole. The depth of the screw
hole is 3 mm (0.1 in).
C
[LAN] terminal (RJ-45)
The projector can be controlled by connecting it to a
PC through the computer network for control
commands to be sent to the projector.
D
[RS-232C] terminal (D-sub 9-pin
male)
The projector can be controlled by connecting a PC to
this terminal.
E
[3D SYNCHRO] terminal
By connecting a 3D Synchro Emitter (sold separately)
to this terminal, you can view 3D movies.
F
[TRIGGER] terminal (
E
)
Output terminal for DC 12 V, 100 mA power supply. It
is used for sending output signals to control devices
such as an elevating screen that is equipped with a
trigger function.
Note that improper connection may damage the
projector. (Tip=DC +12 V, Sleeve=GND)
12
Getting Started
