JVC D775U - GRD775 - MiniDV Digital Camcorder, Instructions Manual

Page: 42 / 52

MasterPage: Advan_Heading0_Right
42
EN
Still images can be dubbed from a tape to a
memory card.
1
Load a cassette. ( pg. 16)
2
Load a memory card. ( pg. 17)
3
Set the VIDEO/MEMORY Switch to
“VIDEO”.
4
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
5
Set “[T]
➝
[M] COPY” to “ON”. ( pg. 35)
6
Press
6
to start playback.
7
At the point you want to dub, press
6
again to engage Still Playback.
8
To dub the image, press SNAPSHOT .
●
The “ ” indication appears during dubbing.
NOTE:
To use Playback Special effects with a video
image you wish to dub, perform up to step
8
using
the remote control. ( pg. 24)
Dubbing Still Images Recorded On
A Tape To A Memory Card
To use this camcorder as a player
1
Following the illustration, pg. 23,
“Connections To A TV Or VCR” , connect the
camcorder and the VCR’s input connectors.
2
Perform steps
1
-
6
( pg. 23)
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
To stop dubbing, stop recording on the
VCR, then stop playback on the camcorder.
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. (
pg. 13)
●
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”
(
pg. 35). Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”
(
pg. 35).
•
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV” (
pg. 35).
Dubbing To A VCR
FEATURES FOR RECORDINGS EDITING
GR-D775US_EN.book Page 42 Friday, December 15, 2006 11:14 AM