JVC D-ILA DLA-VS3000G Instructions Manual Download Page 24

Page: 24 / 70

Connecting to the RS-232C Terminal

RS-232C Terminal

Laptop, etc.

RS-232C Connection Cable

(Sold Separately)

To [RS-232C] Terminal

This Unit

For more information on control, please refer to “External Control”P. 55.

Connecting to the REMOTE Terminal

This Unit

Wired Remote Controller
(Sold Separately)

Connection Cable

(Sold Separately)

To [REMOTE] Terminal

For more details on the wired remote controller and connection cable, please consult your dealer.

Connecting the Power Cord (Supplied Accessory)

Connect the power cord supplied to the power input terminal on

the main unit

Insert the supplied power plug into the wall outlet.

Precautions to prevent fire and electric shock

The power consumption of this unit is large. Please connect it directly to the wall outlet.

When you are not using the projector, please unplug the power cord from the outlet.

Connect it using only the power cord supplied.

Do not use a voltage other than the indicated power voltage.

Do not damage, break or modify the power cord. Do not place a heavy object on the power cord, or heat or pull it.

Doing so may damage the power cord.

Do not unplug the power cord with wet hands.

Ground Cable

To Ground

Power Cord (Supplied)

Set up

Summary of Contents for D-ILA DLA-VS3000G







































































Search results

Summary of Contents for D-ILA DLA-VS3000G

Reviews:

Related manuals for D-ILA DLA-VS3000G

Brands by name

Popular brands

JVC D-ILA DLA-VS3000G, Instructions Manual

Search results

Summary of Contents for D-ILA DLA-VS3000G

Reviews:

Related manuals for D-ILA DLA-VS3000G

Brands by name

Popular brands