ENGLISH
41
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
Function
>
Trigger
35
Trigger
Configures the output of Trigger terminal.
Off
Do not activate.
On(Power)
Move the screen UP/DOWN in conjunction with the power.
On(V-Stretch)
Operate the anamorphic lens in conjunction with the “V-Stretch”.
Function > Test Pattern
36
Test Pattern
Display 6 types of test patterns. For checking the color condition and tone, and the pixel size. Use whenever necessary.
●
This can also be displayed by the remote control. (
)
Function > Off Timer
37
Off Timer
Automatically powers off when there is no operation for a certain duration.
Off
Disables the off timer.
1 hour
Auto power off after 1 hour.
2 hours
Auto power off after 2 hours.
3 hours
Auto power off after 3 hours.
4 hours
Auto power off after 4 hours.
Function > High Altitude Mode
38
High Altitude Mode
Selects this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On
Enable.
Off
Disable.
Information
Input
Displays the currently selected video input.
Source
Displays the type of the current video input signal.
(If PC signal is input, this item cannot be displayed)
Resolution
In the case of PC signal, the resolution is displayed.
H Frequency
In the case of PC signal, the horizontal frequency is displayed.
V Frequency
In the case of PC signal, the vertical frequency is displayed.
Deep Color
Displays the bit depth (color depth) of the video signals input from the HDMI terminals.
[Deep Color is not displayed when Y Cb Cr (4:2:2) is input.]
Lamp Time
Displays the accumulated hours of usage of the light-source lamp.
