(No.PA023)1-21
4.4.3 PIXEL SHIFT
ADJUSTMENT
(1) From Service menu, select the adjustment pattern of the color cross-hatch.
(2) From the Service menu, set <Adjust>to <Pixel Shift>.
(3) Adjust [H Pixel Adj.R], [H Pixel Adj.G], [H Pixel Adj.B] to make H direction (Pixel Shift) to become the best point.
(4) Adjust [V Pixel Adj.R], [V Pixel Adj.G], [V Pixel Adj.B] to make V direction (Pixel Shift) to become the best point.
4.4.4 DESTINATION WRITING
Note :
Perform this operation during standby mode.
ADJUSTMENT
(1) Run Region Writer.exe and start Region Writer.
(2) From the COM Port on the top left of the screen, select
the PC COM number being used.
(3) From the US/JAPAN/EU/CHINA buttons in the center of
the screen, click the destination button for the set to be
written.
(4) Writing is successful if [OK] appears on the top right of
the screen.
Fig.2 REGION WRITER
Instruments
REPLACING COMPONENTS
z
OPTICAL BLOCK
Test point
Adjustment menu
Service menu <Adjust>
→
<Pixel shift>
Preparation
Instruments
Destination Writing Software
REPLACING COMPONENTS
z
PROCESSOR PWB
Test point
Adjustment menu
Preparation
