JVC D.I.S.T. 1250i InteriArt HV-32D25EJ Instructions Manual Download Page 29

Page: 29 / 59

Using the TV’s menu

HV-32D25EJW / LCT1271-001A-U / ENGLISH

SURROUND FEATURES

• “SURROUND FEATURES” may not be

displayed in the MENU (main menu)
when the headphones are connected.

Disconnect the headphones before using
the “SURROUND FEATURES” menu.

3D-PHONIC

Dolby Surround Pro Logic surround sound
and Dolby Digital surround sound can be

easily enjoyed without additional surround
speakers.
Using rear surround signals of Dolby

Surround encoded programmes or Dolby
Digital programmes, this function will create
the surround sound as if surround speakers

were located to your right and left.

• This function does not work properly

except for Dolby Surround encoded
programmes and Dolby Digital
programmes.

When viewing a programme from the

EXT terminal which has been set to

DIGITAL-IN:

You can enjoy the atmosphere of the
surround sound of Dolby Digital

programmes.
If the programme source has 5.1-channel
Dolby Digital soundtracks, you can enjoy the

atmosphere of the 5.1- channel Dolby Digital
surround.
When viewing Dolby Surround encoded

programmes, you can enjoy the atmosphere
of Dolby Surround Pro Logic surround
sound.

When viewing a programme from the

EXT terminal which has not been set

to DIGITAL-IN, or when viewing a TV

programme:

When viewing Dolby Surround encoded
programmes, you can enjoy the atmosphere

of Dolby Surround Pro Logic surround
sound.

• For details of how to adjust the surround

effect level, adjust the volume balance of
the speakers, and perform the setting

necessary when adding a front speaker
system or subwoofer system, see “3D-
PHONIC setting” on page 30.

• You can turn this function on or off with a

single press. For details, see “3D-

PHONIC function” on page 15.

DOLBY SURROUND

You can enjoy the surround sound of Dolby
Digital programmes and Dolby Surround
encoded programmes.

• This function does not work properly

except for Dolby Surround encoded

programmes and Dolby Digital
programmes.

• Additional surround speakers are needed

to use this function to enjoy surround
sound. Although you can listen to Dolby

Digital audio without surround speakers,
you cannot enjoy surround sound such as
5.1-channel Dolby Digital surround

sound. For details, see “DOLBY
SURROUND setting” on page 32.

• Before using this function, correctly set

each of the items in the DOLBY
DIGITAL/PRO LOGIC menu in

accordance with “DOLBY SURROUND
setting” on page 32.

When viewing a programme from the

EXT terminal which has been set to

DIGITAL-IN:

You can enjoy the surround sound of Dolby

Digital programmes.
If the programme source has 5.1-channel
Dolby Digital soundtracks, you can enjoy the

5.1-channel Dolby Digital surround sound.

D0045-EN

3D-PHONIC

DOLBY SURROUND

DANCE CLUB

CONCERT HALL

STADIUM

SURROUND OFF

BACK

SURROUND FEATURES

HV-32D25EJW.fm Page 29 Monday, October 21, 2002 1:19 PM

Summary of Contents for D.I.S.T. 1250i InteriArt HV-32D25EJ




























































Search results

Summary of Contents for D.I.S.T. 1250i InteriArt HV-32D25EJ

Reviews:

Related manuals for D.I.S.T. 1250i InteriArt HV-32D25EJ

Brands by name

Popular brands

JVC D.I.S.T. 1250i InteriArt HV-32D25EJ, Instructions Manual

Search results

Summary of Contents for D.I.S.T. 1250i InteriArt HV-32D25EJ

Reviews:

Related manuals for D.I.S.T. 1250i InteriArt HV-32D25EJ

Brands by name

Popular brands