10
VOLUME
Turning On the Power
To turn on the unit,
press STANDBY/ON
.
The STANDBY lamp on the unit goes off.
• When you press the source button—CD
3
/
8
,
TAPE
2
3
, FM/AM/DAB, and AUX, the unit
automatically turns on.
To turn off the unit (on standby),
press STANDBY/ON
again.
The STANDBY lamp on the unit lights red.
• The clock flashes on the display until you set the built-in
clock. After setting the clock, the clock time will appear on
the display while the unit is in standby mode.
• A little power is always consumed even while the unit is in
standby mode.
To switch off the power supply completely,
unplug the AC
power cord from the AC outlet.
Turning Off the Unit Automatically
(Auto Standby)
Using Auto Standby, the unit automatically turns itself off (on
standby) about 3 minutes after playing back a disc or a tape.
• You can also turn off the unit automatically by using the
Sleep Timer. (See page 29.)
On the remote control ONLY:
To activate Auto Standby,
press A.STANDBY.
The
A.STANDBY
indicator appears on the display.
• When the playback is stopped, the
A.STANDBY
indicator starts flashing on the display.
To deactivate Auto Standby,
press A.STANDBY again.
The
A.STANDBY
indicator goes off.
STANDBY/ON
A. STANDBY
Selecting the Source
To select the source,
press CD
6
, TAPE
2
3
, FM/AM/
DAB, or AUX.
• When you select CD or TAPE as the source, playback starts
automatically.
To operate the CD player,
see pages 12 to 15.
To operate the tape deck,
see page 16.
To operate the tuner (FM, AM (MW) or DAB),
see pages 17
to 24.
To record on a tape,
see pages 25 and 26.
To use an external equipment,
see page 24.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “Volume
MIN,” “Volume 1” – “Volume 31,” and “Volume MAX.”
• The volume level has no effect on recording.
To increase the volume,
press
(or
turn
VOLUME control clockwise on the unit).
To decrease the volume,
press
VOLUME – (or
turn
VOLUME control counterclockwise on the
unit).
• When you press and hold either button, you can change the
volume level continuously.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
When you turn off the unit with the volume level is
over “Volume 20.”
The volume level is automatically set to “Volume 20” next time you
turn on the unit.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; Otherwise,
the sudden blast of sound can damage your
hearing, speakers and/or headphones when you
turn on the unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
Continued
09-11_UX-HB4[B]6.p65
04.8.5, 6:16 PM
10
