JVC CA-UXG45 Instructions Manual Download

Page: 51 / 70

English

To connect the USB Memory or DAP

Connect the DAP to the System using the USB cable
supplied with the DAP.

• Use a USB cable with a “series A” plug at the System end.
• When disconnecting the USB Memory or DAP, make sure

that playback is finished and that the System is in the stop
condition.

To play back sounds on the USB Memory or DAP

• The USB indicator on the display is lit while USB

MEMORY is selected.

To select a track/group

* For details about the group selection, see “For MP3

playback” below.

•

IMPORTANT

• Always set volume to “VOL MIN” when connecting or

disconnecting the other equipment.

• Connect the USB Memory or DAP directly to the front

panel of the unit. Connecting via a USB hub may result
in malfunction.

• USB Memory and DAPs compatible with the USB

mass storage class specifications are connectable.

• Some DAPs are not compatible with the unit.
• Coded or encrypted tracks in a special method cannot be

played on the unit. Only MP3 is supported.

To start:

To stop:

USB

MEMORY

Increases the track/group* numbers.

Decreases the track/group* numbers.

Resume Play for Audio CD/MP3/USB
Memory/DAP

If you press

during playback, the position of the track

where you stopped playback will be memorized by the unit.
By pressing CD

or USB MEMORY

, you can

start playback again from the point where you stopped
it.

To activate/cancel resume play

When the source is CD or USB MEMORY...

memo

• Pressing

or disconnecting the USB Memory/DAP

will erase the position of the track where you stopped
playback.

• To play back from the first track while resume play is

activated, press

twice during playback then press

or USB MEMORY

Remote
ONLY

SET/RESUME

RESUME ON

RESUME OFF

sec.

For MP3 playback

According to the MP3 playback mode,

or number buttons work for the group

selection or the track selection.

Examples:

When the MP3 play back mode is “GROUP.”

You can change the MP3 playback mode
by pressing MP3 MODE.
• Each time you press the button, the MP3

playback mode changes as follows:

TRACK:

• Only tracks are detected (groups are ignored).
•

, and number buttons

work for the track selection of the MP3.

GROUP:

• Both groups and tracks are detected.
•

, and number buttons

work for the group selection of the MP3.

• Number buttons work for selecting the track

number within the group.

Total group number

Total track number

GR (Group) indicator

MP3 MODE

TRACK

GROUP

UX-G45[UW].BOOK Page 12 Tuesday, May 30, 2006 2:07 AM

Summary of Contents for CA-UXG45







































































Search results

Summary of Contents for CA-UXG45

Reviews:

Related manuals for CA-UXG45

Brands by name

Popular brands

JVC CA-UXG45, Instructions Manual

Search results

Summary of Contents for CA-UXG45

Reviews:

Related manuals for CA-UXG45

Brands by name

Popular brands