71
English
5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step
4
.
6
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flashes
while the changes you have made are recorded on the
MD.
To divide the group again, see the DIVIDE GR function
on page 70.
When “CANNOT JOIN” appears in step
5
You are trying to join two groups which are separated by one or
more tracks. In such a case, move the tracks or one of the groups
so that the groups are adjacent. (See pages 72 and 78.)
Joining Two Groups—JOIN GR
This function allows you to join two adjacent groups into a
single group.
When the groups have their own titles, the title of the
preceding group is reassigned to the joined group.
Once two groups are joined, the other groups are
renumbered.
• To stop any time during the editing process before step
6
,
press MD GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very beginning—that is, inserting a disc. You can also edit
an MD during playback (in normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press MD GROUP TITLE/EDIT repeatedly until
“JOIN GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has only one or no groups, you
cannot go on to the following steps.
• During playback:
The group number of the currently playing track will
appear on the right. If the track does not belong to any
group, the group number will be indicated by “– –.”
4
Press GROUP SKIP
¢
or GROUP SKIP
4
while holding down SHIFT to select the two
adjacent groups you want to join.
Ex.: When groups 7 and 8 are selected.
Group Nos. to be joined
EN65_74UX-A10DVD[UB].pm6
02.10.7, 8:11 AM
71
