42
*1 While the speaker position is "R" (
page 9,
10), the speaker setting icon is displayed in the
initial setting screen, allowing you to set it. It is not
displayed at other times.
AUDIO
Items
Contents
(
: initial setting)
DIGITAL
AUDIO
OUTPUT
Select an output signal type from the following
in accordance with the equipment connected to
the digital audio output terminal (AV amplifier,
etc.). (See the list below for the preference
items and output signal.)
PCM ONLY:
Equipment corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or equipment having the
same function.
:
DTS/Dolby digital decoder or equipment having
the same function.
D (Dynamic).
RANGE
COMPRESSION
To make adjustments for the difference
between a high volume and a low volume when
playing back with low volume (only for a DVD
recorded with Dolby digital).
:
D. range compression automatically works.
ON:
D. range compression always works.
STREAM/PCM
AUTO
SPK. SETTING
*1
Items
Contents
LEVEL
This allows you to adjust the volume of the
surround speakers (Sub-woofer does not work
when 2ch sound is used).
SURROUND RIGHT SPEAKER,
SURROUND LEFT SPEAKER,
SUBWOOFER
(Displayed when "SUB WFR" is
set to "ON" (
page 40).)
:
This allows you to select a speaker and adjust
its volume.
TEST TONE:
A test tone is produced when it is set to "ON".
The test tone is output from the currently used
speakers. The output order is click-wise with the
listening point as a center.
Setting it to "OFF" stops the test tone.
RETURN:
It allows you to return to the speaker-setting
screen.
DISTANCE
If the distance from the listening point to each
speaker varies, this allows you to set the
distance between the listening point and each
speaker. Improved surrounding effect can be
obtained by adjusting the sound output timing
from the speakers.
FRONT SPEAKER:
This allows you to adjust the distance from the
listening point to the front speakers. The initial
setting is 3 meters and is adjustable between
0.3 meters to 9 meters.
SURROUND SPEAKER:
This allows you to adjust the distance from the
listening point to the surround speakers. The
initial setting is 3 meters and is adjustable
between 0.3 meters to 9 meters.
RETURN:
It allows you to return to the speaker-setting
screen.
NOTE
* There is no output for DVD AUDIO with content protection set.
• For a DVD VIDEO without content protection set, there is a 20 bit or 24 bit output at the digital audio output terminal.
Playback disc
DIGITAL AUDIO OUTPUT preference
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
48 kHz, 16/20/24 bits
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48 kHz, 16 bits stereo linear PCM
48/96/192 kHz,
16/20/24 bits linear PCM DVD AUDIO*
48 kHz, 16 bits stereo linear PCM
44.1/88.2/176.4 kHz,
16/20/24 bits linear PCM DVD AUDIO*
44.1 kHz, 16 bits stereo linear PCM
DTS DVD VIDEO/DVD AUDIO*
DTS bit stream
48 kHz, 16 bits stereo linear PCM
DOLBY DIGITAL DVD VIDEO/
DVD AUDIO*
DOLBY DIGITAL bit stream
48 kHz, 16 bits stereo linear
PCM
CD/VCD/SVCD
44.1 kHz, 16 bits stereo linear PCM/48 kHz, 16 bits linear PCM
DTS CD
DTS bit stream
44.1 kHz, 16 bits linear PCM
MP3/WMA disc
32/44.1/48 kHz, 16 bits linear PCM
List of relationships of DIGITAL AUDIO OUTPUT preference items and output
signal
NX-DV3[UJ].book 42 ページ ２００４年１２月２８日 火曜日 午後２時３７分
