JVC CA-MXKC58 Instructions Manual Download Page 72

Page: 72 / 134

G-1

Warnings, Cautions and Others

CAUTION ––

STANDBY/ON button !

Disconnect the mains plug to shut the power off
completely (all lamps and indications go off). When
installing the apparatus, ensure that the plug is easily
accessible. The

STANDBY/ON button in any

position does not disconnect the mains line.
• When the unit is on standby, the STANDBY lamp

lights red.

• When the unit is turned on, the STANDBY lamp goes

off.

The power can be remote controlled.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

CAUTION:

Do not open the top cover or cabinet. There are no user serviceable parts

inside the unit; leave all servicing to qualified service personnel.

CAUTION:

VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN

OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

[European Union only]

MX-KC58[UJ]_EN.book Page 1 Wednesday, March 14, 2007 1:42 PM

Summary of Contents for CA-MXKC58







































































































































Search results

Summary of Contents for CA-MXKC58

Reviews:

Related manuals for CA-MXKC58

Brands by name

Popular brands

JVC CA-MXKC58, Instructions Manual

Search results

Summary of Contents for CA-MXKC58

Reviews:

Related manuals for CA-MXKC58

Brands by name

Popular brands