JVC CA-MXKC58 Instructions Manual Download Page 18

Page: 18 / 134

Playing back from iPod

This system is equipped with an iPod terminal on the front
panel. You can connect your iPod to this terminal and enjoy
the sound from your iPod.

• Remember you cannot send any data to your iPod from

this system.

memo

• The iPod battery is charged while the System is turned on

and STANDBY (except in ECO mode). See the iPod
instruction manual about battery charging.

• Sound distortion may occur when playing back audio

sources with high recording levels. When distortion
occurs, it is recommended to turn off the equalizer of the
iPod. For information on operating the iPod, see the iPod
instruction manual.

• JVC is not responsible for any loss of or damage to iPod

that might result from the use of this product.

• When you connect your iPod to the cable, make sure it

connects all the way in.

• Remove the iPod from the cable when you do not use.
• Do not carry the System with iPod connected. You might

drop it down or it might cause damages to the connector
part.

• Do not touch or hit the iPod terminal pins or the connecter

pins directly. It might cause damages to the connector part.

• Compatible iPod types:

If the iPod does not play correctly, please update your iPod
software to the latest version.
• For details about updating your iPod, check on the

Apple web site
<http://www.apple.com>.

Resume Play for Audio CD/MP3/WMA

If you press

during playback, the position of the track

where you stopped playback will be memorized by the
unit.
By pressing CD

, you can start playback again from

the point where you stoppped it.

To activate/cancel resume play

When the source is a CD...

memo

• Changing the disc by pressing the disc selection keys

will erase the track number for resume play.

• To play back from the first track while resume play is

activated, press

twice during playback then press

Main Unit

ONLY

sec.

iPod nano 1GB/2GB/4GB

iPod nano (2nd Generation) 2GB/4GB/8GB

iPod mini 4GB/6GB

iPod (4th Generation) 20GB/40GB

iPod photo (4th Generation) 20GB/30GB/40GB/60GB

iPod video (5th Generation) 30GB/60GB/80GB

iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.

Summary of Contents for CA-MXKC58







































































































































Search results

Summary of Contents for CA-MXKC58

Reviews:

Related manuals for CA-MXKC58

Brands by name

Popular brands

JVC CA-MXKC58, Instructions Manual

Search results

Summary of Contents for CA-MXKC58

Reviews:

Related manuals for CA-MXKC58

Brands by name

Popular brands