12
Using the CD Player
About Disc Indicator:
The Disc indicator consists of the following three kinds of indica-
tors:
One Touch Play
The power comes on, and operations are done automatically.
❏
By pressing the CD
6
button, the System will come on, and if
a CD is loaded for the disc number that was lastly selected, it
will start playing from the first track.
❏
By pressing the CD1-CD3 button, the System will come on, and
if a CD is already loaded for the selected disc number, it will
start play from the first track.
To Load CDs
1
Press the CD Open/Close
0
button on the
Unit to open the tray.
2
Place one or two CDs, with its label side up,
onto the tray.
Be sure that the CD is securely seated inside the recess on the
disc tray.
3
Press the DISC SKIP button on the Unit and
place the next CD.
When you press the button, the tray turns for the next CD.
4
Press the CD Open/Close
0
button on the
Unit.
The tray is closed.
❏
When you use an 8 cm (3'') CD, place it on the inner circle of the
tray.
❏
You can load CDs while listening to the other source or while
listening to the CD being played back.
❏
When power is turned off with the tray opened, the tray is auto-
matically closed.
❏
If the CD cannot be read correctly (because it is scratched, for
example), “ NO DISC” appears on the display.
To Unload CDs
Take out the CD as shown below.
1
While the CD Player is stopped, press the CD
Open/Close
0
button on the Unit to open the
tray.
2
Remove the CD, then press the DISC SKIP
button on the Unit.
The tray turns for the next CD.
3
Repeat step 2 to remove all the CDs.
4
Press the CD Open/Close
0
button on the
Unit to close the tray.
❏
You can remove CDs while listening to the other source.
Tips:
• Removing/changing the CDs during playback
While playing back a CD (e.g. CD1), you can remove or change
the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close
0
button. After removing or changing, press the same button to
close the tray.
Changing the MP3/WMA Playback
Mode
When playing an MP3/WMA disc, you can choose the playback
mode of the MP3/WMA disc as follows:
TRACK mode:
The unit recognizes only tracks (files). You can play an MP3/
WMA disc like an Audio CD.
GROUP mode:
The unit recognizes tracks (files) and albums (folders) on an MP3/
WMA disc. You can play an MP3/WMA disc according to the way
how they are grouped.
On the Remote Control ONLY
Press MP3/WMA MODE before or during playing
an MP3/WMA disc.
• Each time you press the button, the MP3/WMA playback mode
changes between “GROUP” and “TRACK” alternately.
Disc Number indicator:
Lights all the time.
Selected Disc indicator:
Lights for the currently selected
disc number.
Disc Rotation indicator:
Runs when the selected CD is
playing or paused. This indicator
goes out if a CD is not loaded for
the selected disc number.
Selected Disc
indicator
Disc Rotation
indicator
Disc Number
indicator
With the label side up
GROUP indicator appears when the MP3/WMA
playback mode is the GROUP mode.
MX-KC45(J)_EN.book Page 12 Wednesday, January 11, 2006 3:21 PM
Summary of Contents for CA-MXKC45
Page 30: ......
Page 31: ......
Page 62: ...0206NYMCREBET EN FR 2006 Victor Company of Japan Limited MX KC45 COMPACT COMPONENT SYSTEM ...
