JVC CA-MXKC4 Page 8 Instructions Manual Download | Manualshive

Page: 8 / 62

background image

5

Getting Started

Connecting the AM Antenna

Rear Panel of the Unit

• Even when connecting an outside AM antenna, keep the indoor AM loop connected.

CAUTION:

• To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.

Connecting the Speakers

Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. “Right” / “Left” is labeled
on the rear of the speaker.
1. Open each of the terminals to connect the speaker wire leads.
2. Connect the speaker cords to the Speaker terminals of the Unit.

Connect the gray (+) and gray with black stripe (–) cords of the right side speaker to the red (+) and black (–) terminals marked RIGHT
on the System.
Connect the gray (+) and gray with black stripe (–) cords of the left side speaker to the red (+) and black (–) terminals marked LEFT on
the System.

3. Close each of the terminals.

CAUTIONS:

• A TV may display irregular colors if located near the speakers. If this happens, set the speakers away

from the TV.

• Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.

AM antenna wire (not supplied)
If reception is poor, connect the

AM loop antenna (Supplied)

outside antenna.

Turn the loop until you have
the best reception.

Attach the AM loop to its base by
snapping the tabs on the loop
into the slot in the base.

Right side (rear view)

Left side (rear view)

Gray

Gray

Gray
with
black
stripe

Gray
with
black
stripe

MX-KC4(J).book Page 5 Wednesday, November 24, 2004 2:28 PM

«
...
6
7
8
9
10
...
»

Summary of Contents for CA-MXKC4































































Reviews:

No comments

Related manuals for CA-MXKC4

Brand: FAAC Pages: 60

Brand: Oklahoma Sound Pages: 4

Brand: B&W electronics Pages: 13

Brand: Magnat Audio Pages: 24

Brand: SAFE-T-ALERT Pages: 6

Brand: Zenith Pages: 24

Brand: KAM Pages: 4

Brand: Barnett Engineering Pages: 3

Brand: DAD Pages: 36

Brand: Harman Pages: 10

CITATION SURROUND

Brand: Harman Kardon Pages: 14

Brand: Tannoy Pages: 8

Brand: IDS Pages: 36

Brand: Audio Pole Pages: 4

Brand: TELETECH Pages: 4

Brand: Waterfall Audio Pages: 2

Brand: Onn Pages: 11

Brand: Hama Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands