JVC CA-MXKC4 Instructions Manual Download | Manualshive

Page: 29 / 62

background image

26

Troubleshooting

• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as

your dealer, for service.

Symptom

Possible Cause

Action

No sound is heard.

• Connections are incorrect, or loose.

• Headphones are connected.

• Check all connections and make cor-

rections. (See pages 4 to 6.)

• Disconnect the headphones.

Poor radio reception

• The antenna is disconnected.
• The AM Loop Antenna is too close

to the System.

• The FM Wire Antenna is not prop-

erly extended and positioned.

• Reconnect the antenna securely.
• Change the position and direction of

the AM Loop Antenna.

• Extend FM Wire Antenna to the best

reception position.

The disc tray does not open.

• The AC power cord is not plugged in.
• Tray is locked.

• Plug the AC power cord.
• Unlock the tray. (See page 15.)

The CD skips.

The CD is dirty or scratched.

Clean or replace the CD. (See page 25.)

The CD does not play.

The CD is upside down.

Put the CD in with the label side up.

The MP3 disc does not play.

• No MP3 files are recorded on the disc.
• MP3 files do not have the file exten-

sion —.MP3, .Mp3, .mP3, or .mp3
in thier file names.

• MP3 files are not recorded in the for-

mat compliant with ISO 9660 Level
1 or Level 2.

Replace the disc.

The readout time of the MP3 disc is too
long.

The readout time varies with the com-
plexity of the recording configuration.

Do not use too many hierarchies and
folders when recording. Also, do not
record any other types of audio tracks
together with MP3 files. (See page 11.)

The cassette holder cannot be opened.

During tape playing, the power cord
was unplugged.

Plug in the power cord, and turn on the
System.

Unable to record.

Cassette record protect tabs are re-
moved.

Cover holes on back edge of cassette
with tape.

Unable to operate the Remote Control.

• The path between the Remote Con-

trol and the sensor on the Unit is
blocked.

• The batteries have lost their charge.

• Remove the obstruction.

• Replace the batteries.

Operations are disabled.

The built-in microprocessor has mal-
functioned due to external electrical in-
terference.

Unplug the System then plug it back in.

MX-KC4(J).book Page 26 Wednesday, November 24, 2004 2:28 PM

«
...
27
28
29
30
31
...
»

Summary of Contents for CA-MXKC4































































Reviews:

No comments

Related manuals for CA-MXKC4

Brand: Eclipse TD Pages: 10

Brand: KEF Pages: 10

Brand: Samsung Pages: 2

Brand: Yaesu Pages: 2

Brand: Eastwood Pages: 12

Brand: Eastwood Pages: 16

Brand: Eastwood Pages: 4

Brand: Eastwood Pages: 12

Brand: Easy Clocking Pages: 23

JBL EON600 Series

Brand: Harman Pages: 3

Brand: Displays2go Pages: 3

Brand: EarthQuake Pages: 4

Brand: Roland Pages: 12

Brand: Valcom Pages: 8

Air-Cooled Automatics ACAPTS-1.0

Brand: Bernard Pages: 4

Brand: Caliber Pages: 28

Brand: NAPCO Pages: 4

Brand: Vonyx Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands