MX-J100
1-9
Prior to performing the following procedure, remove
the top cover, the side covers, the CD Tray fitting
and the CD changer unit.
There is no need to remove the front panel
assembly.
Remove the seven screws H attaching the
mother(main) board and the tuner board to the rear
panel on the back of the body.
Remove the three screws I attaching the heat sink
to the rear panel on the back of the body.
Remove the three screws J attaching the rear panel
on the back of the body.
1.
2.
3.
Removing the rear panel (See Fig.14)
Prior to performing the following procedure, remove
the rear panel.
Disconnect the harness from connector HCW1 of the
mother(main) board on the right side of the body.
Release the harness from the clamp in the body.
Disconnect the harness from head wire connector
DW1 and DW2 extending to the mother(main) board
in the body.
Disconnect the harness from connector RCW1 of the
power transformer.
Remove the screw K attaching the earth terminal to
the base chassis.
Disconnect connector CCW1 and CCW2 connected
to the mother(main) board from the front
compartment (The mother(main)) board will be
detached with the tuner board and the assembly.
1.
2.
3.
4.
5.
Removing the mother(main) board
(See Fig.15 and 16)
Fig.14
Fig.15
Fig.16
H
Rrear panel
H
H
J
J
I
Front panel assembly
Mother (main) board
Headphone board
HCW1
Mother (main) board
Heat sink
Tuner board
DW2
DW1
CCW2
CCW1
Power transformer
RCW1
K
Clamp
