JVC CA-MXGA77 Instructions Manual Download

Page: 11 / 68

Connecting Other Equipment

You can connect audio equipment—used only as a playback
device.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect audio equipment

Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.

For playing the other equipment through this unit,

connect between the audio output jacks on the other
equipment and AUX IN jacks by using audio cords (not
supplied).

To audio output

AUX IN

Audio equipment

CANCEL

/ DEMO

CANCEL

/ DEMO

NOW you are ready to plug in the unit and
other connected equipment.

Canceling the Display Demonstration

When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.

On the unit ONLY:

To cancel the display demonstration,

press CANCEL/DEMO while the display
demonstration is shown on the display.

When you press other buttons

The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for
more than 2 seconds.

01_08MXGT88&GA77[J].pm6

03.1.10, 7:11 PM

Summary of Contents for CA-MXGA77





































































Search results

Summary of Contents for CA-MXGA77

Reviews:

Related manuals for CA-MXGA77

Brands by name

Popular brands

JVC CA-MXGA77, Instructions Manual

Search results

Summary of Contents for CA-MXGA77

Reviews:

Related manuals for CA-MXGA77

Brands by name

Popular brands