– 15 –
English
To stop during play, press
7
.
• Random play also stops when
0
is pressed.
To exit from Random play mode, press RANDOM again
during play so that the unit enters Continuous play mode.
To use Random play mode, you have to exit from the
Program play mode.
If you press
¢
or
4
Skips to the next track selected randomly.
Repeating Tracks or Discs — Repeat Play
You can have all the discs, the program or the individual track
currently playing repeat as many times as you like.
To repeat play, press REPEAT during or before
playing.
• Each time you press the button, Repeat play
mode changes as follows, and the following
indicator lights up on the display:
REPEAT 1:
Repeats one track on one disc.
REPEAT 1 DISC*:
Repeats all the tracks on one disc.
REPEAT ALL DISC: Repeats all the tracks on all the discs.
*
REPEAT 1 DISC is not used for Program play.
To cancel Repeat play, press REPEAT repeatedly until the
REPEAT indicator (REPEAT 1, REPEAT 1 DISC or
REPEAT ALL DISC) goes off from the display.
• Repeat play and Random play cannot be used at the same
time.
Prohibiting Disc Ejection — Tray Lock
You can prohibit disc ejection from the unit and lock discs.
• This operation is possible only while the unit is on with
disc selected as the source.
On the unit ONLY:
To prohibit disc ejection, press
0
for the carrousel while
holding
7
.
“LOCKED” appears for a while, and the carrousel is locked.
To cancel the prohibition and unlock the discs, press
0
for
the carrousel while holding
7
.
“UNLOCKED” appears for a while, and the carrousel is
unlocked.
If you try to eject discs
“LOCKED” appears to inform you that the Tray Lock is in use.
To stop during play, press
7
.
To exit from Program play mode, press PROGRAM again
before or after play so that the unit enters Continuous play
mode. (The program you have made is stored in memory
until you turn off the unit or erase the program.)
To modify the program
Before playing, you can erase the programed
tracks shown on the display by pressing CANCEL.
• Each time you press the button, the last
programmed track is erased from the program.
To check the program during play, press
¢
(or
4
) so that the playing track will change according to the
program (or reverse) order.
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps 3 and 4 of the programming procedure on
page 14.
To erase the entire program before or during play, press
7
twice.
• Ejecting a carrousel will also erase the stored memory.
If you try to program a 33rd track
“FULL” will appear on the display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the disc. Such entries are ignored.
Playing at Random — Random Play
The tracks of the selected disc will play at random.
1
Load a disc.
• If the current playing source is not the CD player, press
CD
6
, then
7
before going to the next step.
2
Press RANDOM so that “RANDOM”
appears on the display.
The RANDOM indicator also lights up on the
display.
• The tracks are played automatically at random. Random
play ends when all tracks are played once.
CANCEL
/DEMO
M
RANDOM
PROGRAM
REPEAT
REPEAT ALL DISC
REPEAT 1 DISC
REPEAT 1
1 DISC
ALL DISC
EN13-20.CA-MXG65V&68V[US]_f
01.5.17, 5:08 PM
15
