MX-G500
1-17
Prior to performing the following procedure, remove
the side panel.
Remove the five screws A attaching the side panel
and remove the side panel.
1.
Removing the side panel (See Fig. 1)
Remove the four screws B attaching the side
speaker.
Pull out the side speaker and remove the speaker
cord from the speaker terminal.
1.
2.
Removing the side speaker
(See Fig. 2 and 3)
< Speaker section >
It is exchange in a unit.
Please do not decompose as much as possible.
NOTES : It will be good to use the tool with a flat tip, since a
boss's portion is pasted with adhesives. Please take care not to
damage the cabinet at this time.
Side panel
Side speaker
Front panel
Side speaker
Speaker terminal
Fig.1
A
(long wood screw)
A(long screw)
A
(short wood screw)
B
Fig.2
Fig.3
Boss and adhesion
Boss and
adhesion
