JVC CA-MXG500 Instructions Manual Download Page 50

Page: 50 / 60

– 15 –

English

Playing at Random—–Random Play

The tracks of the selected CD will play at random.
• To use Random play mode, you have to cancel the Program

play mode.

Load a CD.

Press one of the disc number
buttons (CD1, CD2, and CD3)
for the disc you want to play,
then press

Press RANDOM so that “RANDOM”
appears on the display.

The RANDOM indicator also lights up on the
display.
• Activating Random play cancels Repeat play or All Disc

play. (One Disc is automatically selected.)

• The tracks are played automatically at random. Random

play ends when all tracks are played once.

To stop during play,

press

To exit from Random play mode,

press RANDOM again

during play so that the unit enters All Disc play mode.
• Random play is also canceled when you press

If you press

Skips to the next track selected randomly.

Repeating Tracks or CDs—–Repeat Play

You can have all the CDs, the program or the individual track
currently playing repeat as many times as you like.
• Repeat play and Random play cannot be used at the same

time.

To repeat play,

press REPEAT during or before

playing.
• Each time you press the button, Repeat play

mode changes as follows, and the following
indicator lights up on the display:

REPEAT 1

: Repeats one track on one CD.

REPEAT 1 DISC

** : Repeats all the tracks on one CD.

REPEAT ALL DISC

: Repeats all the tracks on all the CDs,

or all the tracks on the program.

See pages 12 and 13.

REPEAT 1 DISC is not used for Program play.

To cancel Repeat play,

press REPEAT repeatedly until the

REPEAT indicator (REPEAT 1, REPEAT 1 DISC or
REPEAT ALL DISC) goes off from the display.
• Repeat play is also canceled when you press

Prohibiting Disc Ejection—–Tray Lock

You can prohibit CD ejection from the unit and can lock the
carrousel.
• This operation is possible only while the unit is on with CD

selected as the source.

On the unit ONLY:

To prohibit disc ejection,

press

for the carrousel while

holding

“LOCKED” appears for a while, and the carrousel is locked.

To cancel the prohibition and unlock the carrousel,

press

for the carrousel while holding

“UNLOCKED” appears for a while, and the carrousel is
unlocked.

If you try to eject CDs

“LOCKED” appears to inform you that the Tray Lock is in use.

RANDOM

REPEAT ALL DISC

REPEAT 1 DISC

REPEAT 1

1 DISC

ALL DISC

CD 1

CD 2

CD 3

REPEAT

PRO

EN12-16.MX-GT700&G500[C]f.pm6

02.2.19, 9:34 AM

Summary of Contents for CA-MXG500





























































Search results

Summary of Contents for CA-MXG500

Reviews:

Related manuals for CA-MXG500

Brands by name

Popular brands

JVC CA-MXG500, Instructions Manual

Search results

Summary of Contents for CA-MXG500

Reviews:

Related manuals for CA-MXG500

Brands by name

Popular brands