background image

– 28 –

4

Set the off-time you want the unit to turn off
(on standby) at.

1)

Turn 

4

 / 

¢

 to set the hour, then press

SET/DISPLAY.
“SET” appears for 1 second.

2)

Turn 

4

 / 

¢

 to set the minute, then press

SET/DISPLAY.
“SET” appears for 1 second, then the unit enters
source selecting mode.

5

Turn 

4

 / 

¢

 to select the source to play,

then press SET/DISPLAY.

“SET” appears for 1 second.
• The source changes as follows:

TUNER FM

: tunes in to a specified preset FM station.

=

 

Go to step 6.

TUNER AM

: tunes in to a specified preset AM (MW/LW)

station. 

=

 

Go to step 6.

1 CD-- 1

:

plays from a specified track of a specified
disc. 

=

 

Go to step 6.

TAPE

:

plays a tape in the cassette deck.

=

 

Go to step 7.

AUX IN

:

plays an external source. 

=

 

Go to step 7.

6

When selecting “TUNER FM” or “TUNER AM”

Turn 

4

 / 

¢

 to select the preset station number, then

press SET/DISPLAY.
The unit enters volume setting mode.

When selecting “1 CD-- 1”

1)

Turn 

4

 / 

¢

 to select the disc number, then press

SET/DISPLAY.
“SET” appears for 1 second.

2)

Turn 

4

 / 

¢

 to set the track number, then press

SET/DISPLAY.
“SET” appears for 1 second, then the unit enters
volume setting mode.

7

Turn 

4

 / 

¢

 to set the

volume level.

• The volume level changes as follows:

• If you select “VOLUME – –,” the volume is set to the

last level when the unit has been turned off.

8

Press SET/DISPLAY to complete
the Daily Timer setting.

The DAILY (Daily Timer) indicator stops
flashing and remains lit. “OK 

” appears on

the display for 2 seconds.
The settings you have done are shown on the
display in sequence for your confirmation.

9

Press

 to turn off the unit (on

standby) if you have set the Daily
Timer with the unit turned on.

• If the unit is turned on before the on-time comes

Daily Timer does not work.

• Even if you unplug the AC power cord or if a power failure

occurs

Once you set the timer, the timer setting may remain stored in
memory in a few days. In this case, check whether the timer
setting still remains or not.

To turn on or off Daily Timer after its setting is done

1

Press CLOCK/TIMER repeatedly until
“DAILY” appears on the display.

The DAILY (Daily Timer) indicator starts
flashing on the display and 

 (Timer)

indicator remains lit.

2

To turn off the Daily Timer, press
CANCEL/DEMO.

The DAILY (Daily Timer) and 

 (Timer)

indicators go off from the display (“DAILY
OFF” appears for a while).
The Daily Timer is canceled, but the setting for the Daily
Timer remains in memory.

Or

To turn on the Daily Timer, press
SET/DISPLAY.

“OK 

” appears on the display for 2 seconds.

The settings you have done are shown on the
display in sequence for your confirmation.

1 CD

 

-- 1

 

TAPE

AUX IN

TUNER FM

TUNER AM

VOLUME 10

VOLUME 15

VOLUME – –

VOLUME 5

PRESET

CLOCK

/ TIMER

CANCEL / DEMO

SET /

DISPLAY

D A I L Y

D A I L Y

SET /

DISPLAY

Continued

EN24-30.CA-HXZ3R[B]f.p65

5/21/02, 2:10 PM

28

Summary of Contents for CA-HXZ3
















































Reviews: