background image

21

English

Using Sleep Timer

With Sleep Timer, you can fall asleep to your favorite music
or radio program.
• You can set Sleep Timer only when the unit is turned on.
• You can also turn off the unit automatically by using Auto

Standby. (See page 8.)

How the Sleep Timer actually works

The unit automatically turns off after the specified length of
time passes.

On the remote control ONLY:

1

Press SLEEP.

The 

SLEEP

 indicator starts flashing on the

display.

• Each time you press the button, the length of time

changes as follows:

2

Wait for about 5 seconds after specifying the
length of time.

The 

SLEEP

 indicator remains lit on the display.

To check the remaining time until shut-off time,

 press

SLEEP once. The remaining time until shut-off time appears
for about 5 seconds.

To change the shut-off time,

 press SLEEP repeatedly until

the length of time you want appears.

To cancel the setting,

 press SLEEP repeatedly until the

SLEEP

 indicator goes off and display returns to the normal

indication.
• Turning off the unit also cancels the Sleep Timer.

(canceled)

10

20

120

30

60

90

OFF

SLEEP

SLEEP

When you set the Sleep Timer after the Daily Timer
starts playing the selected source

The unit turns off with either timer having an earlier shut-off time.

If you set the Sleep Timer while playing back or
recording a tape

Do not shut the unit off with the Sleep Timer while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.

19-21_FS-H350&H300[C]2.p65

04.3.18, 10:37 AM

21

Summary of Contents for CA-FSH300



























































Reviews: