background image

20

3

For the Recording Timer ONLY:
Set the off-time you want the unit to turn off.

(1) Press UP or DOWN to set the hour,

then press SET.

(2) Press UP or DOWN to set the minute,

then press SET.
If you want to change the time
setting, press CANCEL.

• The Recording Timer is activated. The 

(timer) and 

REC 

indicators light up. The

display returns to the normal indication.

\

 Go to step 

7

.

4

Press UP or DOWN to select the
source to play.

Each time you press the button, the source changes as
follows:

• Make sure the playing source (either a cassette tape or a

disc) is inside when you select “TAPE” or “CD.”

If you want to change the time setting, press CANCEL
repeatedly to return step 

2

.

5

Press SET.

The   (timer) and active daily timer number
indications lights up. The display returns to the
normal indication.

6

Press /– to adjust the
volume for the on-time.

7

Press STANDBY/ON 

 to turn

off the unit if you have set the
timer with the unit turned on.

On the unit ONLY:

To activate the timer,

 press and hold

DAILY TIMER/SNOOZE on the unit
repeatedly to select the timer number you
want.

PRESET

GROUP

UP

DOWN

PRESET

GROUP

TUNER

TAPE

CD

SET

VOLUME

STANDBY/ON

DAILY 1

To deactivate the timer,

 press and

hold DAILY TIMER/SNOOZE.
• Each time you press and hold the button,

the timer setting changes as follows:

To change the timer,

 repeat steps 

1

 to 

6

 on pages 19 and this

page.
• To activate the Daily Timer again without changing the

setting, press DAILY TIMER/SNOOZE on the unit
repeatedly to select the timer number you want.

When there is no playing source (either a cassette tape
or a disc) inside when you select “TAPE” or “CD”

The source to play is changed to “TUNER” when the on-time
comes.

If the unit is already turned on when the timer on-time
comes

The timer does not work.

When you unplug the AC power cord or if a power
failure occurs

The timer setting remains. Set the built-in clock and activate the
timer again.

Using Snooze Timer

The Snooze Timer turns off the unit (standby) only for 5
minutes while Daily Timer is in operation.
• You can set the Snooze Timer only while the Daily Timer is

in operation.

On the unit ONLY:

Press DAILY TIMER/
SNOOZE while Daily Timer
is in operation.

The unit turns off (standby) and the 

SNOOZE

 indicator

appears on the display.
After 5 minutes, the unit automatically turns on with the
source you selected in step 

4

 on the left column.

If the unit is turned on when the Snooze Timer is
working

Both Snooze Timer and Daily Timer will be canceled.

If you set the Snooze Timer when there is less than 5
minutes until the Daily Timer off-time

The unit will not turn on even when 5 minutes passed.

When you unplug the AC power cord or if a power
failure occurs

The timer will be canceled. You need to set the clock first, then the
timer again.

DAILY 1

DAILY 2

DAILY 3

REC

Canceled

Continued 

OFF

REC

SET

PRESET

GROUP

UP

DOWN

PRESET

GROUP

19-21_FS-H300[J]6.p65

04.3.17, 11:43 AM

20

Summary of Contents for CA-FSH300



























































Reviews: