E-20
ON-SCREEN DISPLAY
On-screen display
Besides E-E images and playback images, the monitor connected to the VIDEO OUTPUT terminals
(VIDEO LINE OUT, Y/C OUT, COMPONENT OUT and HDMI OUT) provides the following on-screen
information.
On-screen display
Description
Operation
Status display
Displays the setting status of the VCR
operation mode, date/time, counter.
Settings can be performed with DIS-
PLAY in the DISPLAY Menu screen.
ON
: Always display. According to
each event or error, the event
and alarm displays are
shown for about 3 seconds.
AUTO
: It displays for about 4 sec-
onds during mode changes.
OFF
: No on-screen display. The
alarm display is shown
according to errors, which
occurred.
Event display
Displays the operating status of blank
search, index recording/search.
Alarm display
Displays error/alarm messages for
incorrect operation or improper condi-
tion of BR-HD50.
Warning display
When an error occurred with the VCR,
it displays warnings with the relevant
error codes. (
X
Page 80)
It is displayed automatically when an
error with the VCR occurred.
Menu display
Displays the menu setting screen.
(
X
Page 64)
When BR-HD50 enters the STOP/
STILL mode or no cassette tape is
loaded, the menu is displayed when
the MENU button is pressed.
Multi Cue-up screen
Displays the Multi Cue-up screen for
registering or selecting cue-up
(searching) point. (
X
Page 56)
When BR-HD50 enters the STOP,
STILL or PLAY mode, press the Cue-
up button to display the Multi Cue-up
screen.
VIDEO OUTPUT
Monitor
E-21
ON-SCREEN DISPLAY
Status display
Status display
: It displays the current settings and operating status.
No.
Item
Description
1
The
1
display contents differs between DV format and HDV format.
DV format
Sampling frequency/audio
output CH
Memo
If the counter display position
is set to the upper left, this item
will be displayed on the lower
right.
• DV
Displayed when recording or playing back a tape with
video in DV format.
• Sampling frequency
While recording an analog audio signal, the setting value
of AUDIO MODE: DV in the AUDIO Menu screen is dis-
played (32kHz or 48kHz).
During playback, the sampling frequency of the sound
recorded on the tape is displayed (32kHz, 48kHz, 44.1kHz).
During HDV/DV signal input, the sampling frequency of the
sound input is displayed.
• A.LOCK
Lights up when the video and audio sampling clocks (at
48kHz) are synchronized in the PLAYBACK mode.
Always lights up in the RECORDING mode and EE mode.
• Audio output channel
The audio channel output from the AUDIO OUT terminal is
displayed (CH-1/2, CH-3/4, MIX). (only in 32kHz mode)
• With A/V INFO. in the DISPLAY Menu screen, whether to
display this item can be selected.
HDV format
HDV format display
Displayed when recording or playing back a tape with video in
HDV format. HDV format details are displayed.
HDV-HD30P: 720/30p signal
HDV-HD25P: 720/25p signal
HDV-HD24P: 720/24p signal
HDV-SD60P : 480/60p signal
HDV-SD50P : 576/50p signal
Note
Does not support tapes in 576/26p mode from the GR-PD1
camera. Displays HDV-SD50p when playing back the tape.
H D V H D 3 0 P
–
S P 2 0
m i n
0 6 / 1 0 / 0 5
S T A N D B Y - O F F
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
1
3
D V 2 K C H – 1 / 2
S P 2 0
m i n
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
R E C I N H I B I T
0 6 / 1 0 / 0 5
S T A N D B Y - O F F
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
1
DV format
HDV format
