manualshive.com logo in svg

JVC BLU-ESCENT DLA-VS2300G, Instructions Manual, Page: 30 / 56

Share
Download
JVC BLU-ESCENT DLA-VS2300G Instructions Manual Download Page 30

Input Signal

Input Level

For setting the dynamic range (gradation) of the video input.

0

If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become

underexposed.

Setting

Description

0-255 (PC)

Select this setting if you are inputting PC signals (dynamic range: 0 - 255).

16-235 (Video)

Select this setting if you are inputting video signals (dynamic range: 16 - 235).

Color Space

For setting the color space of the input signal.

Setting

Description

YCbCr(4:4:4)

Select this setting when inputting YCbCr(4:4:4) video signals.

YCbCr(4:2:2)

Select this setting when inputting YCbCr(4:2:2) video signals.

RGB

Select this setting when inputting RGB video signals.

Hide

 

2

In the Dual mode, you can hide one of the images to check the operation of e-shift.

Setting

Description

Hide1

Hides the input image of HDMI1.

Hide2

Hides the input image of HDMI2.

Off

Does not hide the input images.

* This function is different from that of the Hide button on the remote control.

30

Adjust/Set

Summary of Contents for BLU-ESCENT DLA-VS2300G

























































Reviews:

No comments