No. 51776
AV28WT5EPS AV24WT5EPS
AV28WT5EIS AV24WT5EIS
AV28WT5EKS AV24WT5EKS
26
Item
Measuring
instrument
Test point
Adjustment part
Description
Adjustment
of WHITE
BALANCE
(High Light)
Signal
generator
Remote
control unit
2.DRIVE
(R)
＊＊＊
(B)
＊＊＊
"
The adjustment for Low Light WHITE BALANCE should be
finished.
"
Set the PICTURE MODE to NORMAL.
1. Receive a black and white signal (colour off).
2. Select 2.V/C from the SERVICE MENU.
3. Select 2.DRIVE with the FUNCTION UP/DOWN key.
4. Change the screen colour to white with 4 key or 7 key (Drive of
Red), 6 key or 9 key (Drive of Blue).
5. Press the MENU key, and memorize the set values.
Adjustment
of
SUB BRIGHT
Remote
control unit
3.BRIGHT
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 3.BRIGHT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If the brightness is not the best with the initial setting value,
make fine adjustment until you get the best brightness.
6. Press the MENU key and memorize the set value.
Adjustment
of
SUB CONT.
Remote
control unit
4.CONT.
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 4.CONT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION - / + key.
5. If the contrast is not the best with the initial setting value, make
fine adjustment until you get the best contrast.
6. Press the MENU key and memorize the set value.
REMOTE CONTROL UNIT
1
2
3
4
5
7
8
6
9
▼
▲
▼
▲
DRIVE
(R)
DRIVE
(R)
DRIVE
(B)
DRIVE
(B)
