8
HOW TO MAKE PRESENTATIONS
1. Presenting material such as printed matter and 3-dimensional objects
●
Put an object on the stage and adjust the picture size with
the ZOOM buttons
1
while checking the screen. When
the picture size is determined, adjust the focus with the
FOCUS buttons
2
.
*
When using in a room, it is recommended to turn on the
side illumination (for switching on the illumination, refer to
p. 13).
●
When shooting a 3D object, use the 5-position camera arm
function to add presence to the picture.
While moving the camera arm in the direction shown
3
,
press the lock release button
4
. Then, move the camera
arm in the direction shown
5
and release the lock release
button
4
to fix the arm at the lock position (5 steps).
●
When capturing the image of a large object such as the
page of an encyclopedia, pull out the book holder in the
direction shown
6
.
2. Presenting slide films
Turn on the side illumination and insert the film into the slide
film holder
7
. Then, adjust the size of the picture with the
ZOOM buttons
1
. When the picture size is determined, ad-
just the focus with the FOCUS buttons
2
.
Notes:
●
Do not apply excessive force to the book holder.
●
Do not release the camera arm when the lock release
button is pressed. Otherwise, a malfunction or injury
may result.
ON-SCREEN ADJUSTMENTS
ZOOM
FOCUS
FAR
NEAR
WIDE
TELE
LIGHTS
IRIS
MENU/ENTER
VIDEO
OUT
PC
FREEZE
AUTO WHITE
SET
DIGITAL
PRESET
1
2
2
!
1
3
6
6
5
4
●
To use the slide film holder, turn the side illumination on
and direct the fluorescent lamp down.
●
If the slide film (vertical) is magnified until the mount sec-
tion can no longer be seen, focusing is not possible. Use
the zoom at the tele side.
●
Do not put any objects on the stage.
7
