JVC AV-48P775/H Service Manual Download Page 11

Page: 11 / 61

(No.YA173)1-11

3.1.6 SCREEN ASS'Y

• Take out the SPEAKER GRILLE.
• Take out the FRONT CONTROL BOX.

(1) Disconnect the connector [

CN00Z

(2) Remove 4 screws

[A]

attaching the SCREEN ASS’Y.

(3) Remove 10 screws

[B]

from rear side.

(4) Take out the SCREEN ASS'Y.

NOTE :

• Please place the SCREEN ASS'Y on a flat table without fail.
• Because of the large size, at least 2 parsons are

recommended for removal and reassemble.

• Use core not to scratch the screen during work.
• During assembly, be sure to engage the left and right tabs

with the cabinet mounting positions.

• When than supporting the SCREEN ASS'Y, avoid grasping

the top of the screen panel, instead grasp the left and right
areas.

Fig.2

3.1.7 CONVERGENCE SENSOR

• Take out the SPEAKER GRILLE.
• Take out the FRONT CONTROL BOX.
• Take out the SCREEN ASS’Y.

(1) Remove the 1 screw

[C]

attaching the SENSOR HOLDER.

(2) Remove the claw of the SENSOR HOLDER to take out the

CONVERGENCE SENSOR.

(3) Take out the 3 others CONVERGENCE SENSOR same

manner.

Fig.3

3.1.8 MIRROR

• Take out the SPEAKER GRILLE.
• Take out the FRONT CONTROL BOX.
• Take out the SCREEN ASS'Y.

(1) Remove 9 screws

[D]

attaching the mirror brackets of the

upper, left and right side.

(2) Raise slightly to disengage of the mirror from the bottom

bracket. (If necessary, loosen the screws attaching the
bottom bracket)

(3) Take out the MIRROR.

NOTE :

• The MIRROR is front coated.

Do not touch the front of the MIRROR.

• At least 2 persons are recommended for removable and

reassemble.

Fig.4

SCREEN ASS'Y

CN00Z

(x4)

(x10)

REAR COVER

BODY

(Front view)

FRONT

SCREEN ASS'Y

CONVERGENCE

SENSOR

HOLDER1

SENSOR

HOLDER2

SENSOR

HOLDER1

CLAW

CONNECTOR

(x4)

CONVERGENCE

SENSOR

FRONT

MIRROR

BRACKET

MIRROR BRACKET

(x9)

REAR COVER

BODY

FRONT

Summary of Contents for AV-48P775/H






























































Search results

Summary of Contents for AV-48P775/H

Reviews:

Related manuals for AV-48P775/H

Brands by name

Popular brands

JVC AV-48P775/H, Service Manual

Search results

Summary of Contents for AV-48P775/H

Reviews:

Related manuals for AV-48P775/H

Brands by name

Popular brands