Getting Started
Setting VCR codes
The remote control is prog rammed with VCR codes for power on, power off, play, stop,
fast-forward, rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV”and the other 2-way selector switch to “VCR”.
3) Press and hold down the D
ISPLAY
button.
4) With the D
ISPLAY
button held down, enter the first code number listed with the 10 key pad.
5) Release the D
ISPLAY
button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 54.
• Some manufacturer’s VCR’s may not respond to the TV/VCR button, even if other buttons
work properly.
• To record, hold down the R
EC
button on the remote and press P
LAY
.
20
AV-36P902 English 9/13/01 3:55 PM Page 20
