background image

Additional preparation

41

ENGLISH

AV-32/28X5SU/BU / LCT1797-001A-U / English

„

Devices which can output the S-

VIDEO signal (Y/C signal) such as 

a S-VHS VCR

Connect the device to an EXT terminal other 
than the EXT-1 terminal.
You can choose a video input signal from the 

S-VIDEO signal (Y/C signal) and regular 
video signal (composite signal). For details 
of how to operate the device, see “S-IN (S-

VIDEO input)” on page 26.

„

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible 
VCR to the EXT-2 terminal. If not, the T-V 
LINK function will not work properly.

• When connecting a T-V LINK compatible 

VCR to the EXT-2 terminal, be sure to 

connect the Decoder to the VCR. If not, 
the T-V LINK function may not work 
properly. After you have registered TV 

channels to the Programme numbers (PR), 
set the DECODER (EXT-2) function for 
the Programme number (PR) to ON in 

order to unscramble a scrambled TV 
channel. For details of operation, see 
“Using the DECODER (EXT-2) 
function” on page 39.

„

Connecting headphones

Connect the headphones with a stereo mini-
jack (of 3.5 mm in diameter) to the 
headphone jack at the TV rear panel.

• When you connect the headphones, the 

TV speakers issue no sound.

„

Video/sound signal output from 

the EXT-2 terminal

You can arbitrarily change over the output of 
the video/sound signal from the EXT-2 

terminal. It is useful when you want to dub 
the video/sound from another device on the 
VCR connected to the EXT-2 terminal. For 

details on how to do this operation, see 
“DUBBING” on page 27.

„

TV output from the EXT-1 terminal

The output of video/sound signal of a TV 

channel you are currently viewing is always 
output from the EXT-1 terminal.

• Changing over a Programme number (PR) 

also changes over the TV output from the 
EXT-1 terminal.

• The video/sound signal from an EXT 

terminal cannot be output.

• Teletext programmes cannot be output.

„

Connecting Speakers/Amplifier

While referring to the Audio equipment 
connection diagram, connect the audio 

equipment you desire to the TV.
You can use external front speakers to listen 
to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the 

amplifier and speakers.

• Turn the TV and Amplifier off.
• To prevent magnetism from the speakers 

adversely effecting the TV screen, use 
magnetic-shielded speakers for the front 
speakers.

• Note that connecting cables are not 

supplied.

• The output from the AUDIO OUT 

terminal is not interrupted by headphone 

connection to the TV. You cannot cut the 
sound from the front speaker even if you 
connect a headphone to the TV.

• Adjust the volume of the external 

speakers with the amplifier.

 

L

R

Back of the TV

1

Amplifier

2

Front speakers (Magnetic-shielded type)

AV-32&28X5SUBU_Eng.book  Page 41  Wednesday, December 22, 2004  10:15 AM

Summary of Contents for AV-28X5BU



















































Reviews: