JVC AV-28F3, Instructions Manual

Page: 12 / 17

ENGLISH - 11 -
1. PROGRAMME will be the first selected item as you enter
the INSTALL menu. Pressing “ ” or “ ” button select the
programme number where you want to the tuned channel
to be stored. (You may also type the programme number
using the digit buttons.)
Note:
• Do not use PROGRAMME item when you modify the cur-
rent programme number’s setting. If you select other
programme number by mistake, the selected programme
number’s setting will be changed.
2. Press “ ” or “ ” button to select BAND . Using “ ” or
“ ” button to select the band in which you want to search
a channel.
3. Press “ ” or “ ” button to select SEARCH . Press
“ ” or “ ” button to start searching. (Press “ ” button to
search forward. Press “ ” to search backwards.)
• If the found channel is not the desired one, press “ ” or
“ ” button to start searching again.
• To stop searching before a channel is found, press the
reverse direction button. For example, when the TV is
searching forward with “ ” button, press “ ” button to
stop searching.
• If you know the channel number which you want to find,
you can find the channel directly. Follow the step 4 to
select the correct standard, then press “
” or “ ”
to select CHANNEL again, and press “ ” or “ ” button to
select the channel number, or enter the number with the
digit buttons.
4. If the picture is not clear or no colour appears, change the
colour system to display the picture normally. Press
“
” or “ ” button to select COLOUR SYSTEM , then
press “ ” or “ ” button to choose the correct one.
• In TV mode: PAL / SECAM
• In AV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43
5. If the channel reception is poor, fine-tune the channel.
Press “ ” or “ ” to select FINE TUNING , then press
“ ” or “ ” button to fine-tune the channel.
6. After the all settings are completed, store the new
channel’s setting to the programme number which you se-
lected. Press “
” or “ ” to select STORE , then
press “ ” or “ ” button to store it. “ T-V LINK ” menu will ap-
pear after the TV stores the settings.
7. If you do not have a T-V LINK compatible VCR, press
“ PICTURE ” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure “ Down-
loading the data to VCR ” on page 6 to transmit the Pro-
gramme table data to the VCR.
To change the Colour system:
If the picture is not clear or no colour appears, choose the
correct colour system to display the picture normally.
1. Press “ ” or “ ” button to select COLOUR SYS-
TEM , then press “ ” or “ ” button to choose the correct
one.
• In TV mode: PAL / SECAM
• In AV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43
2. Press “ ” or “ ” to select STORE , then press “ ” or
“ ” button to store it.
3. When “ T-V LINK ” menu appears, follow the step 4.
4. If you do not have a T-V LINK compatible VCR, press
“ PICTURE ” button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure “ Down-
loading the data to VCR” on page 6 to transmit the
Programme table data to the VCR.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT.2 terminal, use
DECODER(EXT2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4. Display the “ INSTALL ” menu again.
5. Press “ ” or “ ” button to select DECODER(EXT-2) ,
then press “ ” or “ ” button to set to “ ON ”
6. Press “ ” or “ ” to select STORE , then press “ ” or
“ ” button to store it. “ T-V LINK ” menu will appear after the
TV stores the setting.
7. Follow the operating procedure “ Downloading the data
to VCR ” on page 6 to transmit the revised programme
table data to the VCR.
• If you do not want to transmit, press “ PICTURE ” button
to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT.2 terminal. Setting this
item to “ ON ” by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
If this item has been set to “
ON ” but the TV channel cannot
be unscrambled, check the following:
• Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
• Can the TV channel be unscrambled with a decoder?
• Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
ENG-2826W-AK45-1512UK-16-9-BSI-(AV-28F3SJ)-50056683.p65 15.09.2004, 11:00 11